Compaq 5531, 5532 Pserver Setup Pre-NetWare Step Action Result of Action, Enter Pconsole

PSERVER Setup (Pre-NetWare 4)

PSERVER Setup (Pre-NetWare 4)

This procedure configures the Novell file server to use an Internal Ethernet Adapter as a PSERVER in a non-NetWare 4 environment. Please see “NetWare 4 Options” on page 180 for more on a NetWare 4 setup.

NOTE: The Internal Ethernet Adapter replaces a dedicated workstation running PSERVER.EXE or PSERVER.NLM on the file server, so these are no longer needed.

To set up the unit as a PSERVER in a non-NetWare 4 environment, follow the procedure outlined in Table 11.

Table 11. PSERVER Setup (Pre-NetWare 4)

Step	Action	Result of Action
1.	Log in to Novell as supervisor.	Gives you supervisor rights.
2.	Enter PCONSOLE.	PCONSOLE's Main Menu displays.
3.	Select PRINT QUEUE INFORMATION.	List of currently-defined queues comes
		up.
4.	Press <Insert> to add a queue.	Asks for new queue's name.
5.	Type in this new name in any format	New queue is added to list.
	you like and press <Enter>.
6.	Press <Escape>.	Returns to PCONSOLE's Main Menu.
7.	Select PRINT SERVER	A list of existing print servers displays.
	INFORMATION.
8.	Press <Insert> to add a server.	Prompts for the server's name.
9.	Type the name of the Internal Ethernet	This new server is added to the list.
	Adapter. By default, it is M_xxxxxx
	where xxxxxx equals the last six digits
	of the unit's Ethernet address. (e.g.
	M_000BF5)
10.	Select it and press <Enter>.	PRINT SERVER INFORMATION menu
		comes up.

175