Internal Ethernet Adapter
2. To obtain root access to the unit, type:
supervisor
A standard login screen is displayed prompting you for the login name and password.
3. Login to the unit as a root user.
root
NOTE: Root users require the use of a password as configured in the unit’s user list.
4.Enter the password. If this password is not yet set, press enter at the password prompt. Otherwise, enter the password that is already stored on the unit.
password
You are now logged in to the unit as a root user and can access any npsh command on the unit.
NOTE: Because npsh.exe makes use of broadcasts, you may have problems communicating across a router.
Internal Ethernet Adapter
The Print Server configuration in a Novell environment is much simpler than that required in a TCP/IP environment. No addresses, masks, or router entries are necessary and in most cases, the Internal Ethernet Adapter can simply be connected to the network, turned on, and then configured for printing from a Novell station through PCONSOLE. The only parameters that you may want to set are a PSERVER password or possibly the frame type. This type of configuration is done using npsh.exe as detailed in the previous section.
173
