Configuring TCP/IP
The following sections will detail how you configure TCP/IP settings on the different Windows platforms.
Windows NT IP Address and Netmask Configuration
1.Go to the Main program group.
2.Double click on Control Panel.
3.Double click on Network.
4.Select TCP/IP Protocol from Installed Network Software list.
5.Click on the Configure button.
6.A dialogue box will come up asking for network settings. Fill in the IP address and netmask for this workstation and then click OK.
Windows for Workgroups IP Address and Netmask Configuration
Configuring an IP address and netmask for the WfW workstation is part of the procedure involved in installing NetBIOS Network Software. Please see “NetBIOS Using Print Manager Method” on page 191 for more details.
Windows 95 IP Address and Netmask Configuration
1.Open the Settings:Control Panel folder.
2.Double click on the Network icon.
3.Under the Installed Network Software list, select the entry dealing with the TCP/IP Protocol.
4.Click on Configure.
5.A dialogue box will come up asking for network settings. Fill in the IP address and netmask for this workstation and then click OK.
187
