Manuals / Bay Technical Associates / Computer Equipment / Network Card

Bay Technical Associates DS62-MD4, DS Series Firmware / Config Download, Enable Firmware Upgrade

Models: DS Series DS62-MD4 DS62

1 53

Download 53 pages 40.46 Kb

Page 39

Delete ALL outlet groups? (Y/N): y

DS62-Network, DS62-MD4 Network/Modem Host Module

Delete ALL outlet groups? (Y/N): y

Note: There will be no confirmation the groups have been deleted. Select option 1 from the Outlet Group Configuration to verify all outlet groups were deleted.

# Group Name

Outlets

Strike ENTER to continue

Firmware / Config Download

This option allows the admin to flash upgrade the firmware to the Host module through an FTP client. The admin can upload the configuration file, make changes, and download back to the unit. This feature ensures multiple units will have the same configuration without having to manually configure each unit separately.

Enable Firmware Upgrade	1
Enable SSL Cert Upload	2
Enable Configuration File Upload..3
Restore Configuration Defaults....	4
Get Current Configuration File....	5
Display Configuration Error Log...	6
Exit	X,CR
Enter Request :

NOTE: Contact Baytech Support for the instruction sheet and firmware upgrade file.

Enable Firmware Upgrade

This option must be enabled to upgrade the firmware via FTP. The DS unit will display the following, Default is Disabled:

Enabling this will allow the firmware to be updated via ftp

Enable Firmware Upgrade ? (Y/N)

IMPORTANT: Do not type ‘Y’ unless you have received the instructions and firmware from Baytech’s Technical Support. If you typed ’Y’ and see the following below, turn power off than back on to the unit to close the firmware upgrade.

Waiting to receive compressed image file

----------------------------------------------------------------------------

----------------------------------------------------------------------------

---------------------------------------------

At this point follow the instruction to FTP the firmware into the unit.

39

Image 39

Bay Technical Associates DS62-MD4 Firmware / Config Download, Enable Firmware Upgrade, Delete ALL outlet groups? Y/N y

Contents

BayTech Manual Publication Revision May DATA SWITCH DS62 Host Ethernet ModuleDS Series Manual DS62-MD4 Host Ethernet-Modem ModuleTera Term is a product and registered trademark of Vector, Inc DS62-Network, DS62-MD4 Network/Modem Host ModuleCopyright 2007 by Bay Technical Associates, Inc BayTech, is a registered trademarks of Bay Technical Associates, IncDS62-Network, DS62-MD4 Network/Modem Host Module Connection Description10/100 BASE-T NETWORK PORT CONNECTION DS Management DS62-Network, DS62-MD4 Network/Modem Host ModuleDS62-Network, DS62-MD4 Network/Modem Host Module ABOUT THIS OWNER’S MANUALInternal MODEM CONNECTION InstallationConnection Description EIA-232 SERIAL CONNECTIONDS62-Network, DS62-MD4 Network/Modem Host Module PREPARING THE INSTALLATION SITEPower QUICK START HOST ModuleDS62-Network, DS62-MD4 Network/Modem Host Module Serial SetupDS62-Network, DS62-MD4 Network/Modem Host Module Login SetupNetwork Port Configuration Firmware / Config DownloadManage Users Login Setup MenuAccess Control DS62-Network, DS62-MD4 Network/Modem Host Module Attention CharacterDS62-Network, DS62-MD4 Network/Modem Host Module Network Port ConfigurationRadius Configuration TACACS ConfigurationCabling RJ-45 Cables and AdaptersDS62-Network, DS62-MD4 Network/Modem Host Module 9FRJ45PC-1 Without Cisco Interface AdaptersDS62-Network, DS62-MD4 Network/Modem Host Module 9FRJ45PC With Cisco InterfaceDS62-Network, DS62-MD4 Network/Modem Host Module Main ScreenDS62-MD4 Detail Operations and ConfigurationsUnit Configuration Menu Configuration StatusDS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module TelnetDHCP DS62-Network, DS62-MD4 Network/Modem Host Module Serial Port ConfigurationHandshaking Default is NoneDS62-Network, DS62-MD4 Network/Modem Host Module Baud RateWord Size Select “Word Size” and the DS displays the following Default isDS62-Network, DS62-MD4 Network/Modem Host Module Stop Bits ParityRTS/DTR Line Driver Inactivity State Connect Port ID Echo Serial Port Device NameAttention Character Disconnect TimeguardColdfire login root or Universal DS login root PasswordPassword Login Setup MenuAccess Control Manage UsersChange User’s Port Access and Password DS62-Network, DS62-MD4 Network/Modem Host ModuleADD User Select a non-root user and the DS displays DS62-Network, DS62-MD4 Network/Modem Host ModuleDelete User Radius ConfigurationDirect Port Connection DS62-Network, DS62-MD4 Network/Modem Host ModuleTACACS Configuration Setting Up TACACSDS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Network Port ConfigurationEnter IP address in dotted decimal form IP AddressSubnet Mask DS62-Network, DS62-MD4 Network/Modem Host ModuleBreak Length Inactivity TimeoutGateway Address Carriage Return TranslationDS62-Network, DS62-MD4 Network/Modem Host Module DHCP/Telnet/SSH SSH Host Key GenerationIP Filter Configuration Select F, Flush Rules to delete all rules. The DS displays DS62-Network, DS62-MD4 Network/Modem Host ModuleSNMP Configuration DS62-Network, DS62-MD4 Network/Modem Host ModuleSelect D, Delete Rule to delete a specific rule. The DS displays Accept changes ? Y/N SNMP is ENABLED. Enable? Y/NDS62-Network, DS62-MD4 Network/Modem Host Module Read/Write Community String Community StringDefault is zero minutes Web Server ConfigurationDefault is Disabled Default is EnabledDS62-Network, DS62-MD4 Network/Modem Host Module Internal Alarm ThresholdModule Name DS ManagementExternal Alarm Threshold DS62-Network, DS62-MD4 Network/Modem Host ModuleSelect 1, the DS displays Outlet Groups Option 1 and 3 sets the temperature levels to the tenth of a degree. Option 2 and 4 enable the SNMP traps to be sent if the corresponding threshold had been exceededDS62-Network, DS62-MD4 Network/Modem Host Module Select 1, List Outlet Groups to list any outlet groups, the DS display DS62-Network, DS62-MD4 Network/Modem Host ModuleEnable Firmware Upgrade ? Y/N Firmware / Config DownloadEnable Firmware Upgrade Enabling this will allow the firmware to be updated via ftpEnable Configuration File Upload DS62-Network, DS62-MD4 Network/Modem Host Module Restore Configuration DefaultsGet Current Configuration File NOTE The network default IP Address, Subnet, and Gateway isDS62-Network, DS62-MD4 Network/Modem Host Module Display Configuration Error LogModem Port Configuration DS62-MD4 Modem Configuration MenuDS62-Network, DS62-MD4 Network/Modem Host Module Modem Device Name Modem Connectivity TimeoutModem Inactivity Timeout Rings to Auto AnswerDS62-Network, DS62-MD4 Network/Modem Host Module Status MenuOverall System Status Network StatusDS62-Network, DS62-MD4 Network/Modem Host Module Logged UsersMemory Usage Current Routing CacheRoute Setup ProcessesDS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Unit ResetLogout UnitInfo DatabaseTroubleshooting Functional SolutionsDS62-Network, DS62-MD4 Network/Modem Host Module DS62 and DS62-MD4 Reset procedure DS62-Network, DS62-MD4 Network/Modem Host ModuleDS62/DS62-MD4 Exceptions BayTech Product WarrantyBayTech Extended Warranty DS62-Network, DS62-MD4 Network/Modem Host ModuleBay Technical Associates, Inc 5239 A Avenue Technical Supportfrom the power source before servicing or dismantling DS62-Network, DS62-MD4 Network/Modem Host ModuleLong Beach Industrial Park Long Beach, MS 39560 RA # Return Authorization ProcessDS62-Network, DS62-MD4 Network/Modem Host Module Bay Technical Associates 5239 A Avenue