Bay Technical Associates DS62-MD4, DS Series Login Setup Menu, Access Control, Manage Users

DS62-Network, DS62-MD4 Network/Modem Host Module

Attention Character

If no Baytech power strips are to be controlled through this Data Server, skip this step. Pressing the Attention Character 5 consecutive times will access the network main menu. The Default is a semi- colon (;). Select this option to change the attention character. The DS displays the following:

Attention Character is	;
Enter Attention Character :

Login Setup Menu

Figure 3

Access Control	1	Telnet/Serial Enable/Disable Login prompt
Manage Users	2	Change user password or port access,
Direct Port Connection	3	add/delete user,
		Enable/Disable
Radius Configuration	4	See below for Radius menu
TACACS Configuration	5	See below for TACACS menu
Exit	X,CR

Enter Request :

Access Control

This security feature allows the admin to enable or disable usernames and passwords for both network and serial port access.

If either login has been enabled you will get a prompt similar to the following:

Coldfire login: root

Password:

The default user and password is “root/baytech”, all lower case.

Manage Users

This menu allows the administrator to add/delete users and change their passwords for multiple users. Up to 19 users plus an administrator allowed. Usernames and passwords are case sensitive and alphanumeric. The root user can not be removed. Select Manage User and the DS displays the following:

Figure 4

User Management Menu

To change user password or port access, enter number of user. To add/delete user, select appropriate menu choice.

SNMP V3 requires passwords that are between 8 and 31 characters long Enter request, CR to exit menus.

A)...Add user 1)...root

Enter Request :

10