Manuals / Bay Technical Associates / Computer Equipment / Network Card

Bay Technical Associates DS62-MD4, DS Series manual Enable Configuration File Upload

Models: DS Series DS62-MD4 DS62

1 53

Download 53 pages 40.46 Kb

Page 40

Enable Configuration File Upload

DS62-Network, DS62-MD4 Network/Modem Host Module Enable SSL Cert Upload

Selecting this option allows the admin to upload an SSL Certificate to the DS unit via ftp. The filename of the certificate must be (ssl.pem). An SSL certificate is used by the unit to create secure web connections. The DS unit is shipped with a default SSL certificate. This certificate should be replaced with one that better suits the user’s environment. The file format is checked after download to insure that the certificate is valid.

Select this option to Enable SSL Cert Upload, the Host Module will display the following:

Enabling this will allow the SSL Certificate to be updated via ftp

Enable SSL Certificate Upload? (Y/N)

IMPORTANT: If you type ’Y’, the DS will display the following. To stop this function power-cycle the unit to close the SSL Certification Upload.

Waiting to receive ssl.pem SSL certificate file

--------------

At this point FTP the ssl.pem file into the module.

Enable Configuration File Upload

This option allows the admin to upload a configuration file from your computer to the DS. Select Enable Configuration File and the DS displays the following:

Enabling this will allow the system configuration to be updated via ftp

THE UNIT WILL RESET AFTER CONFIGURATION IS COMPLETE

Enable Configuration File Upload? (Y/N)

IMPORTANT: If you type ’Y’, the DS displays the following below. To stop this function power-cycle the unit to close the Configuration File Upload.

Waiting to receive configuration file

----------------------------------------------------------------------------

----------------------------------------------------------------

At this point FTP the file into the unit. A successful file upload and the DS will display:

configuration file valid

updating ds62 configuration

***

ds62 host configuration complete polling DSs

Found DS at mod 2 port 1 DS polling complete configuring DSs

Unsuccessful file upload and the DS will display:

40

Image 40

Bay Technical Associates DS62-MD4, DS Series manual Enable Configuration File Upload

Contents

DATA SWITCH DS62 Host Ethernet Module DS Series ManualDS62-MD4 Host Ethernet-Modem Module BayTech Manual Publication Revision MayDS62-Network, DS62-MD4 Network/Modem Host Module Copyright 2007 by Bay Technical Associates, IncBayTech, is a registered trademarks of Bay Technical Associates, Inc Tera Term is a product and registered trademark of Vector, IncConnection Description DS62-Network, DS62-MD4 Network/Modem Host Module10/100 BASE-T NETWORK PORT CONNECTION DS62-Network, DS62-MD4 Network/Modem Host Module DS ManagementABOUT THIS OWNER’S MANUAL DS62-Network, DS62-MD4 Network/Modem Host ModuleInstallation Connection DescriptionEIA-232 SERIAL CONNECTION Internal MODEM CONNECTIONPREPARING THE INSTALLATION SITE PowerQUICK START HOST Module DS62-Network, DS62-MD4 Network/Modem Host ModuleSerial Setup DS62-Network, DS62-MD4 Network/Modem Host ModuleLogin Setup Network Port ConfigurationFirmware / Config Download DS62-Network, DS62-MD4 Network/Modem Host ModuleLogin Setup Menu Access ControlDS62-Network, DS62-MD4 Network/Modem Host Module Attention Character Manage UsersNetwork Port Configuration Radius ConfigurationTACACS Configuration DS62-Network, DS62-MD4 Network/Modem Host ModuleRJ-45 Cables and Adapters CablingDS62-Network, DS62-MD4 Network/Modem Host Module Adapters DS62-Network, DS62-MD4 Network/Modem Host Module9FRJ45PC With Cisco Interface 9FRJ45PC-1 Without Cisco InterfaceMain Screen DS62-MD4Detail Operations and Configurations DS62-Network, DS62-MD4 Network/Modem Host ModuleConfiguration Status Unit Configuration MenuDS62-Network, DS62-MD4 Network/Modem Host Module Telnet DS62-Network, DS62-MD4 Network/Modem Host ModuleDHCP Serial Port Configuration HandshakingDefault is None DS62-Network, DS62-MD4 Network/Modem Host ModuleBaud Rate Word SizeSelect “Word Size” and the DS displays the following Default is DS62-Network, DS62-MD4 Network/Modem Host ModuleParity DS62-Network, DS62-MD4 Network/Modem Host Module Stop BitsRTS/DTR Line Driver Inactivity State Serial Port Device Name Attention CharacterDisconnect Timeguard Connect Port ID EchoLogin Setup Menu Access ControlManage Users Coldfire login root or Universal DS login root PasswordPasswordDS62-Network, DS62-MD4 Network/Modem Host Module Change User’s Port Access and PasswordADD User DS62-Network, DS62-MD4 Network/Modem Host Module Select a non-root user and the DS displaysRadius Configuration Direct Port ConnectionDS62-Network, DS62-MD4 Network/Modem Host Module Delete UserSetting Up TACACS TACACS ConfigurationDS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Network Port Configuration DS62-Network, DS62-MD4 Network/Modem Host ModuleIP Address Subnet MaskDS62-Network, DS62-MD4 Network/Modem Host Module Enter IP address in dotted decimal formInactivity Timeout Gateway AddressCarriage Return Translation Break LengthSSH Host Key Generation DS62-Network, DS62-MD4 Network/Modem Host Module DHCP/Telnet/SSHIP Filter Configuration DS62-Network, DS62-MD4 Network/Modem Host Module Select F, Flush Rules to delete all rules. The DS displaysDS62-Network, DS62-MD4 Network/Modem Host Module SNMP ConfigurationSelect D, Delete Rule to delete a specific rule. The DS displays SNMP is ENABLED. Enable? Y/N DS62-Network, DS62-MD4 Network/Modem Host ModuleRead/Write Community String Community String Accept changes ? Y/NWeb Server Configuration Default is DisabledDefault is Enabled Default is zero minutesInternal Alarm Threshold Module NameDS Management DS62-Network, DS62-MD4 Network/Modem Host ModuleDS62-Network, DS62-MD4 Network/Modem Host Module External Alarm ThresholdSelect 1, the DS displays Option 1 and 3 sets the temperature levels to the tenth of a degree. Option 2 and 4 enable the SNMP traps to be sent if the corresponding threshold had been exceeded Outlet GroupsDS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Select 1, List Outlet Groups to list any outlet groups, the DS displayFirmware / Config Download Enable Firmware UpgradeEnabling this will allow the firmware to be updated via ftp Enable Firmware Upgrade ? Y/NEnable Configuration File Upload Restore Configuration Defaults Get Current Configuration FileNOTE The network default IP Address, Subnet, and Gateway is DS62-Network, DS62-MD4 Network/Modem Host ModuleDisplay Configuration Error Log Modem Port ConfigurationDS62-MD4 Modem Configuration Menu DS62-Network, DS62-MD4 Network/Modem Host ModuleDS62-Network, DS62-MD4 Network/Modem Host Module Modem Connectivity Timeout Modem Inactivity TimeoutRings to Auto Answer Modem Device NameStatus Menu Overall System StatusNetwork Status DS62-Network, DS62-MD4 Network/Modem Host ModuleLogged Users Memory UsageCurrent Routing Cache DS62-Network, DS62-MD4 Network/Modem Host ModuleProcesses Route SetupDS62-Network, DS62-MD4 Network/Modem Host Module Unit Reset LogoutUnitInfo Database DS62-Network, DS62-MD4 Network/Modem Host ModuleFunctional Solutions TroubleshootingDS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module DS62 and DS62-MD4 Reset procedureDS62/DS62-MD4 BayTech Product Warranty BayTech Extended WarrantyDS62-Network, DS62-MD4 Network/Modem Host Module ExceptionsTechnical Support from the power source before servicing or dismantlingDS62-Network, DS62-MD4 Network/Modem Host Module Bay Technical Associates, Inc 5239 A AvenueReturn Authorization Process DS62-Network, DS62-MD4 Network/Modem Host ModuleBay Technical Associates 5239 A Avenue Long Beach Industrial Park Long Beach, MS 39560 RA #