Bay Technical Associates DS62-MD4 manual Direct Port Connection, Radius Configuration, Delete User

DS62-Network, DS62-MD4 Network/Modem Host Module

Enter port list (mod.port,mod.port), ALL for all ports, NONE for no ports: 2.1,3.2,3.3

Port access for user1
X = has access
mod 2	mod 3
1234	1234
X	XX

Enter an incorrect port the DS displays:

Enter port list (mod.port,mod.port), ALL for all ports, NONE for no ports: 1.2

Input Error

Delete User

Select D), press <cr>, and type the number of the user to be deleted:

From menu above, enter number for user to delete>1

NOTE: the ‘root’ user can not be deleted.

Direct Port Connection

This will allow the user to be connected directly to a DS serial port, as determined by the TCP port, starting at TCP port 50001.

Direct	Port Connection	is	.........Disabled
Enable	? (Y/N), CR for	no	change) :

Radius Configuration

Radius is used to authenticate logins for the serial and the network ports if passwords and user names are enabled on the DS. If the Radius server rejects either the username or password or does not respond, the DS will display “Invalid Password”.

Radius Enable	1	Enable Radius Login
Radius Server Address	2	Radius server IP address 0.0.0.0 form
Radius Backup Server Address	3	Backup Radius server IP address
Radius Secret	4	Radius secret key (16 char max)
Enable DS62 usernames as backup..5		As written
Radius Login Timeout	6	Enter timeout, in seconds(>=5 and <=30)
Exit	X,CR

Select “Radius Enable” to turn on or off radius authentication. If enabled, the primary radius server address must be specified.

24