Bay Technical Associates DS Series manual DS62-Network, DS62-MD4 Network/Modem Host Module

DS62-Network, DS62-MD4 Network/Modem Host Module

Accept changes ? (Y/N) :

The SNMP Trap Host is a trap management station that receives and processes traps. Traps are system alerts that the Baytech device generates when certain events occur. By default, no trap manager is defined, and no traps are issued. Up to four SNMP Trap Hosts maybe assigned to receive traps. Select a “SNMP Trap Host”, the DS will display the following, Default address is (0.0.0.0) for all Hosts.

SNMP Trap Host 1 IP Address: 220.225.36.212

Enter new Trap Host IP Address:

SNMP Trap Host 2 IP Address: 70.154.96.10

Enter new Trap Host IP Address:

SNMP Trap Host 3 IP Address: 192.168.1.102

Enter new Trap Host IP Address:

SNMP Trap Host 4 IP Address: 192.168.2.136

Enter new Trap Host IP Address:

Read/Write Community String:

Community String:

SNMP community strings authenticate access to MIB objects and function as embedded passwords. In order for your SNMP script/software to access the Baytech SNMP, the community string definitions on your SNMP script/software must match the Baytech SNMP string definitions.

‘Read’—Gives read access to authorized management stations to all objects in the MIB except the community strings, but does not allow write access.

‘Write’—Gives read and write access to authorized management stations to all objects in the MIB, but does not allow access to the community strings

Select ‘SNMP Read Only Community’ option to enter a Read Community string, the DS displays the current setting, Default is public.

SNMP Read Community name: public

Enter Read Community Name:

Select ‘SNMP Read-Write Community’ option to enter a Write Community string, the DS displays the current setting, Default is private.

SNMP Write Community name: private

Enter Write Community Name:

Select the ‘SNMP Enable’ option to enable the SNMP function, the DS displays, Default is Enabled.

SNMP is ENABLED. Enable? (Y/N):

33