Bay Technical Associates DS Series, DS62-MD4 Rings to Auto Answer, Modem Connectivity Timeout

DS62-Network, DS62-MD4 Network/Modem Host Module

Select stop bits: 1 For 1

2 For 2 Enter Request :

Select “Parity” the DS displays the following: Default is None.

Select parity: 1 For None 2 For Even 3 For Odd Enter Request :

Rings to Auto Answer

Select “Rings to Auto Answer” to set the number of rings before the unit answers. The module displays the following: The default setting is 2.

Rings to Auto Answer: 2

Enter number (1-4):

Modem Connectivity Timeout

Select the Modem Connectivity Timeout option to set the continuous connectivity time (1 to 120 minutes) before the modem automatically disconnects. Entering a time of 0 disables the Connectivity Timeout. The timer starts when the modem answers (DCD goes high). The modem will disconnect, regardless of activity, when time runs out. Default setting is 60 minutes. The module displays the following:

Modem Connectivity Timeout (Minutes): 60

Enter Timeout (1-120 minutes, 0 to disable):

Modem Inactivity Timeout

This option sets the time the modem will automatically disconnect, if there is no activity equaling the programmed amount of time (1 to 120 minutes). Default setting is 0 (disabled).

Select Modem Inactivity Timeout and the module display the following:

Modem Inactivity Timeout (Minutes): 60

Enter Timeout (1-120 minutes, 0 to disable):

Modem Device Name

Select Modem Device Name and the following is displayed:

44