Bay Technical Associates DS Series, DS62-MD4 manual SNMP Configuration

DS62-Network, DS62-MD4 Network/Modem Host Module

Are you sure you want to delete all filters? (Y/N)

Enter Request :y

All filers have been deleted.

Select D), Delete Rule to delete a specific rule. The DS displays:

Delete Filter Menu

Enter rule	number to delete rule, 'M' to view
more rules, or 'X' to exit menu.			Target
Rule Num	Ip	Address
1	70.150.140.95		DROP
2	70.150.140.96		ACCEPT
3	70.150.140.99		ACCEPT
Enter Request		:2
Filter Rule 2		deleted.

SNMP Configuration

Selecting the SNMP Configuration and the Host Module respond:

SNMP Trap Host 1 Address	1
SNMP Trap Host 2 Address	2
SNMP Trap Host 3 Address	3
SNMP Trap Host 4 Address	4
SNMP Read-Only Community	5
SNMP Read-Write Community	6
SNMP Enable	7
SNMP v3 Only Enable	8
SNMP Authentication Traps Enable..9
Exit	X,CR

Depending on the firmware, SNMP Configuration allows the admin to control whether or not a user has Read/Write access or Read access only. It also allows the admin to control which IP addresses are allowed to receive a host trap, and simply whether to enable or disable the entire SNMP function.

IMPORTANT: You will need some knowledge of SNMP protocols in order to get the Baytech device to work with your SNMP program. Information provided is for the SNMP Agent only. Baytech Support will assist with the Agent part only. For SNMP Manger assistance refer to the vender manual or contact the vender of the SNMP software you are using.

NOTE: There are a number of shareware MIB Browsers that can be downloaded from the internet to make changes and receive traps for a quick verification test.

NOTE: To use the SNMP functions you need to download the MIB from Baytech’s web site, www.baytech.net. Look under Tech Support, Docs and Downloads.

IMPORTANT: Changes do not take effect until they are saved when you leave the configuration menu. The DS will display:

32