Manuals / Bay Technical Associates / Computer Equipment / Network Card

Bay Technical Associates DS62-MD4, DS Series Logged Users, Memory Usage, Current Routing Cache

Models: DS Series DS62-MD4 DS62

1 53

Download 53 pages 40.46 Kb

Page 46

Logged Users

DS62-Network, DS62-MD4 Network/Modem Host Module

eth0	Link encap:Ethernet	HWaddr 00:C0:48:00:01:FD
	inet addr:192.168.2.136 Bcast:192.168.2.255 Mask:255.255.255.0
	UP BROADCAST RUNNING MULTICAST		MTU:1500 Metric:1
	RX packets:0 errors:0 dropped:0		overruns:0 frame:0
	TX packets:0 errors:0 dropped:0		overruns:0 carrier:0
	collisions:0 txqueuelen:100
	Base address:0x840
lo	Link encap:Local Loopback
	inet addr:127.0.0.1	Mask:255.0.0.0
	UP LOOPBACK RUNNING	MTU:16436	Metric:1
	RX packets:0 errors:0 dropped:0		overruns:0 frame:0
	TX packets:0 errors:0 dropped:0		overruns:0 carrier:0
	collisions:0 txqueuelen:0

Press ENTER to continue

Logged Users

This option shows the number of active sessions. For each session, the name of the user account, the type of interface (serial or network) and the status is provided.

C=configuration user		*=current process
Active Users:		FROM	INTERNAL CONN STATUS PID
#	USER
* 1	root	localhost	Normal 25

Strike T, CR to terminate a connection/process, CR to continue :

Terminate a session by typing “T” at the prompt. The Host Module responds:

Enter number of connection to terminate, CR :

Memory Usage

Mem:	total:	used:	free:	shared:	buffers:	cached:
Mem:	11735040	4136960	7598080	0	380928	458752
Swap:	0	0	0

Press ENTER to continue

Current Routing Cache

IP Data currently held in cache or none upon power cycle.

46

Image 46

Bay Technical Associates DS62-MD4, DS Series manual Logged Users, Memory Usage, Current Routing Cache

Contents

DS62-MD4 Host Ethernet-Modem Module DATA SWITCH DS62 Host Ethernet ModuleDS Series Manual BayTech Manual Publication Revision MayBayTech, is a registered trademarks of Bay Technical Associates, Inc DS62-Network, DS62-MD4 Network/Modem Host ModuleCopyright 2007 by Bay Technical Associates, Inc Tera Term is a product and registered trademark of Vector, IncConnection Description DS62-Network, DS62-MD4 Network/Modem Host Module10/100 BASE-T NETWORK PORT CONNECTION DS62-Network, DS62-MD4 Network/Modem Host Module DS ManagementABOUT THIS OWNER’S MANUAL DS62-Network, DS62-MD4 Network/Modem Host ModuleEIA-232 SERIAL CONNECTION InstallationConnection Description Internal MODEM CONNECTIONQUICK START HOST Module PREPARING THE INSTALLATION SITEPower DS62-Network, DS62-MD4 Network/Modem Host ModuleSerial Setup DS62-Network, DS62-MD4 Network/Modem Host ModuleFirmware / Config Download Login SetupNetwork Port Configuration DS62-Network, DS62-MD4 Network/Modem Host ModuleDS62-Network, DS62-MD4 Network/Modem Host Module Attention Character Login Setup MenuAccess Control Manage UsersTACACS Configuration Network Port ConfigurationRadius Configuration DS62-Network, DS62-MD4 Network/Modem Host ModuleRJ-45 Cables and Adapters CablingDS62-Network, DS62-MD4 Network/Modem Host Module 9FRJ45PC With Cisco Interface AdaptersDS62-Network, DS62-MD4 Network/Modem Host Module 9FRJ45PC-1 Without Cisco InterfaceDetail Operations and Configurations Main ScreenDS62-MD4 DS62-Network, DS62-MD4 Network/Modem Host ModuleConfiguration Status Unit Configuration MenuDS62-Network, DS62-MD4 Network/Modem Host Module Telnet DS62-Network, DS62-MD4 Network/Modem Host ModuleDHCP Default is None Serial Port ConfigurationHandshaking DS62-Network, DS62-MD4 Network/Modem Host ModuleSelect “Word Size” and the DS displays the following Default is Baud RateWord Size DS62-Network, DS62-MD4 Network/Modem Host ModuleParity DS62-Network, DS62-MD4 Network/Modem Host Module Stop BitsRTS/DTR Line Driver Inactivity State Disconnect Timeguard Serial Port Device NameAttention Character Connect Port ID EchoManage Users Login Setup MenuAccess Control Coldfire login root or Universal DS login root PasswordPasswordDS62-Network, DS62-MD4 Network/Modem Host Module Change User’s Port Access and PasswordADD User DS62-Network, DS62-MD4 Network/Modem Host Module Select a non-root user and the DS displaysDS62-Network, DS62-MD4 Network/Modem Host Module Radius ConfigurationDirect Port Connection Delete UserSetting Up TACACS TACACS ConfigurationDS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Network Port Configuration DS62-Network, DS62-MD4 Network/Modem Host ModuleDS62-Network, DS62-MD4 Network/Modem Host Module IP AddressSubnet Mask Enter IP address in dotted decimal formCarriage Return Translation Inactivity TimeoutGateway Address Break LengthSSH Host Key Generation DS62-Network, DS62-MD4 Network/Modem Host Module DHCP/Telnet/SSHIP Filter Configuration DS62-Network, DS62-MD4 Network/Modem Host Module Select F, Flush Rules to delete all rules. The DS displaysDS62-Network, DS62-MD4 Network/Modem Host Module SNMP ConfigurationSelect D, Delete Rule to delete a specific rule. The DS displays Read/Write Community String Community String SNMP is ENABLED. Enable? Y/NDS62-Network, DS62-MD4 Network/Modem Host Module Accept changes ? Y/NDefault is Enabled Web Server ConfigurationDefault is Disabled Default is zero minutesDS Management Internal Alarm ThresholdModule Name DS62-Network, DS62-MD4 Network/Modem Host ModuleDS62-Network, DS62-MD4 Network/Modem Host Module External Alarm ThresholdSelect 1, the DS displays Option 1 and 3 sets the temperature levels to the tenth of a degree. Option 2 and 4 enable the SNMP traps to be sent if the corresponding threshold had been exceeded Outlet GroupsDS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Select 1, List Outlet Groups to list any outlet groups, the DS displayEnabling this will allow the firmware to be updated via ftp Firmware / Config DownloadEnable Firmware Upgrade Enable Firmware Upgrade ? Y/NEnable Configuration File Upload NOTE The network default IP Address, Subnet, and Gateway is Restore Configuration DefaultsGet Current Configuration File DS62-Network, DS62-MD4 Network/Modem Host ModuleDS62-MD4 Modem Configuration Menu Display Configuration Error LogModem Port Configuration DS62-Network, DS62-MD4 Network/Modem Host ModuleDS62-Network, DS62-MD4 Network/Modem Host Module Rings to Auto Answer Modem Connectivity TimeoutModem Inactivity Timeout Modem Device NameNetwork Status Status MenuOverall System Status DS62-Network, DS62-MD4 Network/Modem Host ModuleCurrent Routing Cache Logged UsersMemory Usage DS62-Network, DS62-MD4 Network/Modem Host ModuleProcesses Route SetupDS62-Network, DS62-MD4 Network/Modem Host Module UnitInfo Database Unit ResetLogout DS62-Network, DS62-MD4 Network/Modem Host ModuleFunctional Solutions TroubleshootingDS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module DS62 and DS62-MD4 Reset procedureDS62/DS62-MD4 DS62-Network, DS62-MD4 Network/Modem Host Module BayTech Product WarrantyBayTech Extended Warranty ExceptionsDS62-Network, DS62-MD4 Network/Modem Host Module Technical Supportfrom the power source before servicing or dismantling Bay Technical Associates, Inc 5239 A AvenueBay Technical Associates 5239 A Avenue Return Authorization ProcessDS62-Network, DS62-MD4 Network/Modem Host Module Long Beach Industrial Park Long Beach, MS 39560 RA #