Dixon ZTR 5020 manual Care And Maintenance, Do Not Speed Up The Slow Side, As Over Stroking Of The

Models: ZTR 5424 ZTR 5020

1 48
Download 48 pages 28.41 Kb
Page 38
Image 38
FORWARD TRAVEL SPEED ADJUSTMENTS & CORRECT LEVER INSTALLATION

CARE AND MAINTENANCE

FORWARD TRAVEL SPEED ADJUSTMENTS & CORRECT LEVER INSTALLATION

Stop engine, move levers to drive position, lightly push each upper control lever forward until a resistance is felt on the lever.

At this time, check that the forward lever stops on the bottom of each lever are hitting the stop blocks.

If adjustment is required, loosen the lock nuts on the lever stop and turn the bolt in until the lever hits the stop block before resistance is felt in the hydrostat.

NOTE: Balance of travel speed. If mower tends to pull to either side, re-adjust lever stop on fast side to slow the hydrostat down and even out the ground speed.

DO NOT SPEED UP THE SLOW SIDE, AS OVER STROKING OF THE

HYDROSTAT COULD RESULT IN DAMAGE TO THE UNIT.

If upper control levers are slightly offset following this adjustment, they can be realigned by bending them slightly.

Page 36

Page 38
Image 38
Dixon ZTR 5020, ZTR 5424 manual Care And Maintenance, Forward Travel Speed Adjustments & Correct Lever Installation