TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any riding mower. Type and conditions of grass, cut height setting, engine RPM and ground speed are some of the variables that interact creating differences in cut quality. Examination of one or more of the above will generally produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in improving cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.
| SITUATION | CAUSES | REMEDY | ||
|
| Ground speed |
|
| |
Poor cut quality | Incorrect engine to | Reduce mowing speed Refer to | |||
mower deck belt | |||||
|
|
|
| ||
| Poor cut quality |
| page 39 for part numbers | ||
|
|
|
| ||
| Poor cut quality | Engine RPM too low | Increase engine RPM to maximum | ||
|
|
|
| ||
| Poor cut quality | Dull or bent blade | Sharpen or replace as required | ||
|
|
|
| ||
| Poor cut quality | Consult your dealer | |||
|
|
|
| ||
| Poor cut quality | Grass buildup under | Clean out underside of mower deck | ||
|
| mower deck |
|
| |
|
|
|
| ||
| Poor cut quality | Improper blades | Replace with original equipment | ||
|
|
| blade designed for the Estate Series | ||
|
|
| Models | ||
|
|
|
| ||
| Poor cut quality | Uneven tire pressures | Check and adjust as required per | ||
|
|
| operators manual | ||
Page 42
