User Maintenance | Sharp AL-1670 specification

USER MAINTENANCE

1

2

Turn the power switch off.

Open the bypass tray. Lift slightly on the side cover and slide the cover out until it stops.

	Charger	Gently lift and pull out the upper paper tray and take the
	Charger	3 charger cleaner out by holding the tab.
	cleaner	3 charger cleaner out by holding the tab.

4 Set the charger cleaner onto the transfer charger and gently slide the cleaner in the direction indicated by the arrow two or three times.

Slide the charger cleaner from one end to the other end along the groove of the transfer charger. If the cleaner is stopped on the way, smudges on copies may occur.

●If the white sheet metal is smudged with toner, wipe it with a soft, clean cloth.

Return the charger cleaner to its original position. Close

5 the paper tray. Close the side cover by pressing the handle on the cover.

6 Turn the power switch on.

User maintenanceGENERAL INFORMATION

55

Image 57

Sharp AL-1670 operation manual User Maintenance, Charger cleaner out by holding the tab

Contents

AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions AUTO/MANUAL/PHOTO / / key and indicators p Operation panel and keys for printer featuresOriginal Size Enter key and indicators p Paper Size indicators @1ORIGINAL Data indicator Key and indicators@2Light and dark keys and indicators @3AUTO Image key and indicator p Do not install your copier in areas that are Copier Installation Getting Started Unpacking Checking Packed Components and Accessories Install the TD cartridge SET-UPGently lift and pull out the paper tray until it stops SET-UP Turn the power switch on Load copy paperFront of the paper tray Store the pressure plate lock which has been removed Push the paper tray firmly back into the copier Loading Copy Paper Loading Copy Paper Press the Start key and then the Paper Size 11ENTER key Using the SPF Turn the power switch onNormal Copying Stream feeding mode Set the number of copies using the two copy quantity KeysNormal Copying Press the Start key Adjust the copy density Using the original table Normal Copying Automatic REDUCTION/ENLARGEMENT/ZOOMPress the Auto Image Key Enter the number of copies Press the Start key Manual REDUCTION/ENLARGEMENT/ZOOM Unfold the bypass tray Bypass Feed special paper Bypass Feed special paper TWO-SIDED Copying Group mode Sort modeSORT/GROUP Offset stack Copying in the sort mode SORT/GROUPSet the originals face up in the document feeder tray When all Interrupt copies are finished, press Interrupting a Copy RUNPress the Interrupt key Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save Mode Press the copy ratio display Key XY Zoom Set the number of copies and press the Start key XY Zoom Reverse Press the Dual page Copy key Dual page Copy Rotation Copying 1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Select the desired pattern number using copy quantity keys Erase Press the Erase key to select the desired erase modeUse the Tray Select Key to select the paper tray Margin Shift Genuine Supplies TD Cartridge Replacement TD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement Misfeed in the SPF Misfeed RemovalFirst confirm the misfeed location Open the feeding roller cover and pull the original gently Misfeed in the bypass tray Misfeed RemovalMisfeed in the copier If the misfed original cannot be removed in steps 1 Fusing unit is hot. Take care in removing paper Removing itPush gently the right side of the front cover to open Cover Misfeed in the transport area Misfeed in the lower paper tray Misfeed in the upper paper trayClose the side cover by pressing the handle on the cover Grasp the handle of the lower side cover and gently open Close the paper tray Close the lower side cover Remove the misfed paper User Programs Setting the user programsList of user programs Press and hold the light key for more than User Programs Enter a program number using the left copy quantity Key Entered value will be stored Power Save Modes Preheat modeAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode Copying from the auto power shut-off mode Original table and document feeder cover User MaintenanceBypass tray paper feed roller Transfer charger User Maintenance Charger cleaner out by holding the tabGently lift and pull out the upper paper tray and take Copier TROUBLE? Problem Solution Self-diagnostic function Copier TROUBLE?Example Types and sizes of copy paper SuppliesSupply part numbers Supply list Genuine supplies statement SuppliesProper storage Store the supplies in a location that is Turn the power switch off and disconnect the power Cord Moving InstructionsPush the paper tray back into the copier Copier Specifications Single Pass Feeder Specifications Index Index Material Safety Data Sheet Special Fire Fighting Procedure Ignition TemperatureFlash Point Method Used Flammable Limits Ingredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Page Sharp Corporation