User Maintenance, Bypass tray paper feed roller | Sharp AL-1670

USER MAINTENANCE

Proper care is essential for clean, sharp copies. Please take a few minutes to regularly clean your copier.

Original table and document feeder cover

Stains or dirt on the original table or document feeder cover will also be copied. Wipe the original table and document feeder cover with a soft, clean cloth.

●If necessary, dampen the cloth with water. Do not use thinner,

benzene, or similar volatile cleaning agents.

●Also wipe the scanning window on the orignal table.

Bypass tray paper feed roller

	User	If misfeeds occur frequently when feeding postcards,
	maintenance	If misfeeds occur frequently when feeding postcards,
	maintenance	envelopes, thick paper, etc. through the bypass tray,
		envelopes, thick paper, etc. through the bypass tray,
		wipe the blue paper feed roller at the feed slot of the
		bypass tray with a soft, clean cloth dampened with
		alcohol or water.
	GENERAL	Paper feed roller
	GENERAL	Transfer charger
	INFORMATION	Transfer charger
	INFORMATION	If copies start becoming streaky or blotchy, the transfer
		If copies start becoming streaky or blotchy, the transfer
		charger may be dirty. Clean the charger. The cleaning
		method is described on the next page.

54

Image 56

Sharp AL-1670 User Maintenance, Original table and document feeder cover, Bypass tray paper feed roller, Transfer charger

Contents

AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Operation panel and keys for printer features AUTO/MANUAL/PHOTO / / key and indicators pOriginal Size Enter key and indicators p Paper Size indicators Key and indicators @1ORIGINAL Data indicator@2Light and dark keys and indicators @3AUTO Image key and indicator p Copier Installation Do not install your copier in areas that are Getting Started Checking Packed Components and Accessories Unpacking Gently lift and pull out the paper tray until it stops Install the TD cartridgeSET-UP Turn the power switch on Load copy paper SET-UPFront of the paper tray Store the pressure plate lock which has been removed Loading Copy Paper Push the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size 11ENTER key Normal Copying Using the SPFTurn the power switch on Set the number of copies using the two copy quantity Keys Stream feeding modeNormal Copying Press the Start key Using the original table Adjust the copy density Normal Copying REDUCTION/ENLARGEMENT/ZOOM AutomaticPress the Auto Image Key Enter the number of copies Press the Start key REDUCTION/ENLARGEMENT/ZOOM Manual Bypass Feed special paper Unfold the bypass tray Bypass Feed special paper TWO-SIDED Copying Sort mode Group modeSORT/GROUP Offset stack Set the originals face up in the document feeder tray Copying in the sort modeSORT/GROUP Press the Interrupt key When all Interrupt copies are finished, pressInterrupting a Copy RUN Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light key XY Zoom Press the copy ratio display Key XY Zoom Set the number of copies and press the Start key Reverse Dual page Copy Press the Dual page Copy key Rotation Copying 1 or 4 Select the desired pattern number using copy quantity keys Press the 2 in 1 / 4 in 1 key to complete the selection Press the Erase key to select the desired erase mode EraseUse the Tray Select Key to select the paper tray Margin Shift TD Cartridge Replacement Genuine Supplies TD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement Misfeed Removal Misfeed in the SPFFirst confirm the misfeed location Open the feeding roller cover and pull the original gently Misfeed Removal Misfeed in the bypass trayMisfeed in the copier If the misfed original cannot be removed in steps 1 Push gently the right side of the front cover to open Cover Fusing unit is hot. Take care in removing paperRemoving it Misfeed in the transport area Misfeed in the upper paper tray Misfeed in the lower paper trayClose the side cover by pressing the handle on the cover Grasp the handle of the lower side cover and gently open Remove the misfed paper Close the paper tray Close the lower side cover Setting the user programs User ProgramsList of user programs Press and hold the light key for more than Enter a program number using the left copy quantity Key User Programs Entered value will be stored Auto power shut-off mode Power Save ModesPreheat mode Power Save Modes Setting the power save modesCopying from the preheat mode Copying from the auto power shut-off mode User Maintenance Original table and document feeder coverBypass tray paper feed roller Transfer charger Gently lift and pull out the upper paper tray and take User MaintenanceCharger cleaner out by holding the tab Problem Solution Copier TROUBLE? Example Self-diagnostic functionCopier TROUBLE? Supplies Types and sizes of copy paperSupply part numbers Supply list Supplies Genuine supplies statementProper storage Store the supplies in a location that is Push the paper tray back into the copier Turn the power switch off and disconnect the power CordMoving Instructions Specifications Copier Specifications Single Pass Feeder Index Index Material Safety Data Sheet Ignition Temperature Special Fire Fighting ProcedureFlash Point Method Used Flammable Limits Health Hazards Ingredients CAS No ProportionOther Limits None required under normal use Page Sharp Corporation