1 or 4 | Sharp AL-1670 specification

2 IN 1 OR 4 IN 1

2 in 1 copying

Pattern Pattern

Pattern

Pattern

4 in 1 copying

Pattern

Pattern

The 2 in 1 or 4 in 1 feature is used to copy 2 or 4 originals, collectively in a specified order, onto one sheet.

●These features cannot be used with the dual page copying, XY zoom, erase, or margin shift features.

●Copies can be made with or without the border lines shown in the illustration. See user program No. 6 on page 49.

●The order of originals which will be arranged on the copies can be selected by user programs. There are two patterns of layout for 2 in 1 copying and four patterns of layout for 4 in 1 copying. See user program No. 17 and 18 on page 49.

●The 2 in 1 or 4 in 1 feature operates only in the sort or group mode. If the 2 in 1 or 4 in 1 feature is selected when either the sort or group mode has not been selected, the group mode will be automatically selected.

Pattern

Pattern

1

2

Set the originals face up in the document feeder tray.

●The original table cannot be used for the 2 in 1 or 4 in 1 feature.

Use the TRAY SELECT key to select the paper tray with the desired paper size.

●The bypass tray and any tray with non-standard size paper cannot be used with the 2 in 1 or 4 in 1 feature.

SPECIAL FEATURES 2 in 1 or 4 in 1

3 To confirm or set the layout pattern for 2 in 1 copying, first ensure that both the 2 IN 1 and 4 IN 1 indicators are not lit then press and hold the 2 IN 1 / 4 IN 1 key for more than 5 seconds.

●The 2 IN 1 indicator will blink and the currently selected layout pattern number will blink in the copy quantity display.

To confirm or set the layout pattern for 4 in 1 copying, use the 2 IN 1 / 4 IN 1 key to light the 2 IN 1 indicator then press and hold the 2 IN 1 / 4 IN 1 key for more than 5 seconds.

●The 4 IN 1 indicator will blink and the currently selected layout pattern number will blink in the copy quantity display.

35

Image 37

Sharp AL-1670 operation manual 1 or 4

Contents

AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions AUTO/MANUAL/PHOTO / / key and indicators p Operation panel and keys for printer featuresOriginal Size Enter key and indicators p Paper Size indicators @1ORIGINAL Data indicator Key and indicators@2Light and dark keys and indicators @3AUTO Image key and indicator p Do not install your copier in areas that are Copier Installation Getting Started Unpacking Checking Packed Components and Accessories SET-UP Install the TD cartridgeGently lift and pull out the paper tray until it stops SET-UP Turn the power switch on Load copy paperFront of the paper tray Store the pressure plate lock which has been removed Push the paper tray firmly back into the copier Loading Copy Paper Loading Copy Paper Press the Start key and then the Paper Size 11ENTER key Turn the power switch on Using the SPFNormal Copying Stream feeding mode Set the number of copies using the two copy quantity KeysNormal Copying Press the Start key Adjust the copy density Using the original table Normal Copying Automatic REDUCTION/ENLARGEMENT/ZOOMPress the Auto Image Key Enter the number of copies Press the Start key Manual REDUCTION/ENLARGEMENT/ZOOM Unfold the bypass tray Bypass Feed special paper Bypass Feed special paper TWO-SIDED Copying Group mode Sort modeSORT/GROUP Offset stack SORT/GROUP Copying in the sort modeSet the originals face up in the document feeder tray Interrupting a Copy RUN When all Interrupt copies are finished, pressPress the Interrupt key Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save Mode Press the copy ratio display Key XY Zoom Set the number of copies and press the Start key XY Zoom Reverse Press the Dual page Copy key Dual page Copy Rotation Copying 1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Select the desired pattern number using copy quantity keys Erase Press the Erase key to select the desired erase modeUse the Tray Select Key to select the paper tray Margin Shift Genuine Supplies TD Cartridge Replacement TD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement Misfeed in the SPF Misfeed RemovalFirst confirm the misfeed location Open the feeding roller cover and pull the original gently Misfeed in the bypass tray Misfeed RemovalMisfeed in the copier If the misfed original cannot be removed in steps 1 Removing it Fusing unit is hot. Take care in removing paperPush gently the right side of the front cover to open Cover Misfeed in the transport area Misfeed in the lower paper tray Misfeed in the upper paper trayClose the side cover by pressing the handle on the cover Grasp the handle of the lower side cover and gently open Close the paper tray Close the lower side cover Remove the misfed paper User Programs Setting the user programsList of user programs Press and hold the light key for more than User Programs Enter a program number using the left copy quantity Key Entered value will be stored Preheat mode Power Save ModesAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode Copying from the auto power shut-off mode Original table and document feeder cover User MaintenanceBypass tray paper feed roller Transfer charger Charger cleaner out by holding the tab User MaintenanceGently lift and pull out the upper paper tray and take Copier TROUBLE? Problem Solution Copier TROUBLE? Self-diagnostic functionExample Types and sizes of copy paper SuppliesSupply part numbers Supply list Genuine supplies statement SuppliesProper storage Store the supplies in a location that is Moving Instructions Turn the power switch off and disconnect the power CordPush the paper tray back into the copier Copier Specifications Single Pass Feeder Specifications Index Index Material Safety Data Sheet Special Fire Fighting Procedure Ignition TemperatureFlash Point Method Used Flammable Limits Other Limits Ingredients CAS No ProportionHealth Hazards None required under normal use Page Sharp Corporation