Sharp AL-1670 operation manual Reduction/Enlargement/Zoom, Automatic, Press the Auto Image Key

REDUCTION/ENLARGEMENT/ZOOM

Reduction and enlargement ratios can be selected either automatically with the

AUTO IMAGE ( ) key or manually with the PRESET RATIO selector

( , ) keys and/or the zoom ( , ) keys. The zoom function enables precise copy ratio selection from 50% to 200% in 1% increments.

MAKING COPIES Reduction/enlargement/zoom

Automatic

1 Place the original in the document feeder tray or on the original table.

2	When using the original table, press the ORIGINAL SIZE
	ENTER (	) key until the indicator for the size of the

original on the original table lights up.

Use the TRAY SELECT ( ) key to select the paper tray

3 with the desired paper size.

●This feature will not work when copy paper of non-standard size is used or the bypass tray is used.

4	Press the AUTO IMAGE (	) key.
	● The copy ratio will be automatically set.

●If the size and orientation of the original do not correspond to standard reduction/enlargement ratios for the selected paper tray, then the ORIGINAL SIZE indicator will blink.

●If a PRESET RATIO indicator is blinking, part of the original image may not be copied.

5 Enter the number of copies.

6 Press the START ( ) key.

●To cancel the automatic reduction/enlargement

mode, press the AUTO IMAGE () key again. ● When copying from the SPF with this feature, the automatic reduction/enlargement mode will be

automatically canceled after copying is complete.

20