Sharp AL-1670 User Programs, Enter a program number using the left copy quantity Key

User programs GENERAL INFORMATION

USER PROGRAMS

Enter a program number using the left copy quantity

2 ( ) key.

● The selected program number will blink in the copy quantity display.

●If a mistake is made in steps 2 to 4, press the CLEAR ( ) key. The copier will return to step 2.

● The program numbers are shown in the table on the previous page.

For example, to change the setting of the auto power shut-off timer, enter 3.

Press the START ( ) key.

3 ● The entered program number will be steadily lit on the left side of the copy quantity display and the currently selected parameter number for the program will blink on the right side.

4 Select the desired parameter using the right copy quantity

( ) key.

● The entered parameter number will blink on the right side of the copy quantity display.

●The parameters are shown in the table below.

For example, to change the setting of the auto power shut-off timer to 60 min., enter 2.

Program name	Parameters
Auto clear time	0 e OFF	1 e 30 sec.	* 2 e 60 sec.	3 e 90 sec.	4 e 120 sec.
	5 e 10 sec.
Preheat mode	0 e OFF	1 e 30 sec.	2 e 60 sec.	* 3 e 90 sec.	4 e 120 sec.
Auto power shut-off timer	* 1 e 30 min.	2 e 60 min.	3 e 90 min.	4 e 120 min.	5 e 240 min.
Stream feeding mode	* 0 e OFF	1 e ON
Auto power shut-off setting	0 e OFF	* 1 e ON
Border line for 2 in 1 or 4 in 1	* 0 e OFF	1 e ON
Rotation copy	0 e OFF	* 1 e ON
Auto paper select mode	0 e OFF	* 1 e ON
Auto tray switching	0 e OFF	* 1 e ON
Erase width adjustment	0 e 0"	1 e 1/4"	* 2 e 1/2"	3 e 3/4"	4 e 1"
Layout in 2 in 1 copy	* 1 e Pattern 1	2 e Pattern 2
Layout in 4 in 1 copy	* 1 e Pattern 1	2 e Pattern 2	3 e Pattern 3	4 e Pattern 4
Offset of paper output tray	0 e OFF	* 1 e ON

Factory default settings are indicated with an asterisk (*).

If you select “0” (OFF) in a program, the corresponding function will be disabled.

50