Entered value will be stored | Sharp AL-1670 specs

USER PROGRAMS

5	Press the START (	) key.
	● The right-hand number in the copy quantity display will be steadily lit

and the entered value will be stored.

To continue with other user programs, press the CLEAR

6 ( ) key and then repeat steps 2 to 5. To exit the user

program mode, press the light ( ) key.

●All the alarm indicators will go out.

User programs GENERAL INFORMATION

51

Image 53

Sharp AL-1670 operation manual Entered value will be stored

Contents

AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions AUTO/MANUAL/PHOTO / / key and indicators p Operation panel and keys for printer featuresOriginal Size Enter key and indicators p Paper Size indicators @1ORIGINAL Data indicator Key and indicators@2Light and dark keys and indicators @3AUTO Image key and indicator p Do not install your copier in areas that are Copier Installation Getting Started Unpacking Checking Packed Components and Accessories Gently lift and pull out the paper tray until it stops Install the TD cartridgeSET-UP SET-UP Turn the power switch on Load copy paperFront of the paper tray Store the pressure plate lock which has been removed Push the paper tray firmly back into the copier Loading Copy Paper Loading Copy Paper Press the Start key and then the Paper Size 11ENTER key Normal Copying Using the SPFTurn the power switch on Stream feeding mode Set the number of copies using the two copy quantity KeysNormal Copying Press the Start key Adjust the copy density Using the original table Normal Copying Automatic REDUCTION/ENLARGEMENT/ZOOMPress the Auto Image Key Enter the number of copies Press the Start key Manual REDUCTION/ENLARGEMENT/ZOOM Unfold the bypass tray Bypass Feed special paper Bypass Feed special paper TWO-SIDED Copying Group mode Sort modeSORT/GROUP Offset stack Set the originals face up in the document feeder tray Copying in the sort modeSORT/GROUP Press the Interrupt key When all Interrupt copies are finished, pressInterrupting a Copy RUN Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save Mode Press the copy ratio display Key XY Zoom Set the number of copies and press the Start key XY Zoom Reverse Press the Dual page Copy key Dual page Copy Rotation Copying 1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Select the desired pattern number using copy quantity keys Erase Press the Erase key to select the desired erase modeUse the Tray Select Key to select the paper tray Margin Shift Genuine Supplies TD Cartridge Replacement TD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement Misfeed in the SPF Misfeed RemovalFirst confirm the misfeed location Open the feeding roller cover and pull the original gently Misfeed in the bypass tray Misfeed RemovalMisfeed in the copier If the misfed original cannot be removed in steps 1 Push gently the right side of the front cover to open Cover Fusing unit is hot. Take care in removing paperRemoving it Misfeed in the transport area Misfeed in the lower paper tray Misfeed in the upper paper trayClose the side cover by pressing the handle on the cover Grasp the handle of the lower side cover and gently open Close the paper tray Close the lower side cover Remove the misfed paper User Programs Setting the user programsList of user programs Press and hold the light key for more than User Programs Enter a program number using the left copy quantity Key Entered value will be stored Auto power shut-off mode Power Save ModesPreheat mode Setting the power save modes Power Save ModesCopying from the preheat mode Copying from the auto power shut-off mode Original table and document feeder cover User MaintenanceBypass tray paper feed roller Transfer charger Gently lift and pull out the upper paper tray and take User MaintenanceCharger cleaner out by holding the tab Copier TROUBLE? Problem Solution Example Self-diagnostic functionCopier TROUBLE? Types and sizes of copy paper SuppliesSupply part numbers Supply list Genuine supplies statement SuppliesProper storage Store the supplies in a location that is Push the paper tray back into the copier Turn the power switch off and disconnect the power CordMoving Instructions Copier Specifications Single Pass Feeder Specifications Index Index Material Safety Data Sheet Special Fire Fighting Procedure Ignition TemperatureFlash Point Method Used Flammable Limits Health Hazards Ingredients CAS No ProportionOther Limits None required under normal use Page Sharp Corporation