Sharp AL-1670 Supplies, Types and sizes of copy paper, Supply part numbers, Supply list

SUPPLIES

Types and sizes of copy paper

	Size	Weight	Capacity	Special paper
			(21 lb. bond paper)
Paper tray	5-1/2" x 8-1/2"*	15 lbs. to 21 lbs.	250 sheets
	to 11" x 17"
Bypass tray	Ordinary paper:	15 lbs. to 34 lbs.**	100 sheets	Transparency film,
	5-1/2" x 8-1/2"	(Ordinary paper)		labels, envelopes***
	to 11" x 17"
	Envelopes:
	Commercial 10
	(4-1/8" x 9-1/2")
	International DL
	(110 x 220 mm)
	International C5
	(162 x 229 mm)

*5-1/2" x 8-1/2" copy paper can be used in the upper paper tray but cannot be used in the lower paper tray.

**For paper weighing from 28 to 34 lbs., 8-1/2" x 11" is the maximum size that can be fed through the bypass tray.

***Do not use envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive patches or synthetic materials. These will cause physical damage to the copier.

●For best results, use only paper recommended by SHARP.

●Special papers except envelopes must be fed one sheet at a time through the bypass tray. Up to 10 envelopes can be set at one time.

Supplies

Supply part numbers

When ordering supplies, please use the correct part numbers as listed below.

Be sure to use only genuine SHARP parts and supplies.

GENERAL INFORMATION

Supply list

Supply	Part number	Usable life
TD cartridge	AL-160TD	Approx. 18,000 or 15,000 sheets*
Drum cartridge	AL-160DR	Approx. 30,000 sheets

*18,000 sheets: Based on copying onto letter-type paper at 5% toned area. 15,000 sheets: Based on copying onto letter-type paper at 6% toned area.

( The life of the TD cartridge which has been included in the copier at the factory is approximately 5,000 sheets. (at 6% toned area))

58