INTERRUPTING A COPY RUN
INTERRUPT is used to interrupt a long copy run so that another job can be done.
●SORT or GROUP cannot be selected during interrupt copying.
1
2
3 4 5
Press the INTERRUPT ( 
) key.
●The copier will return to the initial settings.
●When the SPF is being used, the copier will stop after completing copying of the original which has been fed into the SPF.
When the copier stops, remove the original(s) and set the original(s) for interrupt copying.
Select the desired available copier functions.
Set the number of copies.
Press the START ( 
) key.
MAKING COPIES Interrupting a copy run
6 When all INTERRUPT copies are finished, press the
INTERRUPT ( 
) key again to cancel the INTERRUPT mode, and remove the original used for interrupt copying.
●The previous copy quantity, copy ratio, copy density, and paper size will be automatically restored.
Replace the original for the interrupted job and press the
7 START ( 
) key to resume copying.
27
