MISFEED REMOVAL

2 Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below.

If paper is misfed here, proceed to “B. Misfeed in the fusing area”.

If the misfed paper is seen from this side, proceed to “C. Misfeed in the transport area”.

If paper is misfed here, proceed to “A. Misfeed in the paper feed area”.

A. Misfeed in the paper feed area

Push gently the right side of the front cover to open the

1 cover.

 

2

Carefully remove the misfed paper. Turn the roller

 

rotating knob in the direction of the arrow to assist in

 

 

Roller rotating knob

 

removing it.

 

 

 

 

The fusing unit is hot. Take care in removing paper.

Do not touch the surface of the drum (green portion) of the drum cartridge when removing the misfed paper. Doing so may damage the drum and cause smudges on copies.

Close the front cover by pushing both sides with your

3 hands and then close the side cover by pressing the handle on the cover.

The misfeed ( ) indicator will go out.

When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.

B. Misfeed in the fusing area

Push gently the right side of the front cover to open the

1 cover.

STATUS INDICATORS Misfeed removal

45

Page 47
Image 47
Sharp AL-1670 operation manual Removing it, Push gently the right side of the front cover to open Cover