Sharp AL-1670 operation manual User Programs, List of user programs, Setting the user programs

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.

List of user programs

This copier has the following user programs.

Program No.	Program name	Description
1	Auto clear time	Sets the auto clear time. The copier returns to the initial settings when
		the auto clear time elapses after the last copy is made.
2	Preheat mode	Sets the time that elapses before the copier enters the preheat mode after
		any operation is made. See page 52.
3	Auto power shut-off	Sets the time that elapses before the copier enters the auto power shut-off
	timer	mode after any operation is made. See page 52.
4	Stream feeding mode	Enables or disables the stream feeding mode. For description of the stream
		feeding mode, see page 17.
5	Auto power shut-off	Enables or disables the auto power shut-off mode. See page 52.
	setting
6	Border line for 2 in 1 or	Enables or disables the border line which is printed in 2 in 1 or 4 in 1
	4 in 1	copying. See page 35.
7	Rotation copy	Enables or disables rotation of original images. See page 34.
8	Auto paper select mode	Enables or disables the auto paper selection. See page 16.
9	Auto tray switching	Enables or disables the automatic tray switching which occurs when paper
		in a tray runs out. (This switching cannot switch to the bypass tray.)
16	Erase width adjustment	Sets the amount of the edge erase and center erase areas. See page 37.
17	Layout in 2 in 1 copy	Selects a pattern for 2 in 1 copying. See page 35.
18	Layout in 4 in 1 copy	Selects a pattern for 4 in 1 copying. See page 35.
19	Offset of paper output	Enables or disables the offset function of the paper output tray. See page 25.
	tray

User programs

Setting the user programs

Press and hold the light ( ) key for more than 5

1 seconds until all the alarm indicators ( , , , and ) blink and “– –” appears in the copy quantity display.

GENERAL INFORMATION

49