ERASE
Edge erase |
|
A | A |
Center erase
A
B 
A B
Edge + Center erase
A B | A B |
This copier has an edge erase mode and a center erase mode.
●Edge erase can be used to eliminate shadow lines around the edges of copies caused when thick paper or a book is used as an original.
●Center erase can be used to eliminate the shadow produced by the bindings of bound documents.
●Edge + center erase can be used to eliminate shadow lines around the edges of copies and to eliminate the shadow at the center of copies.
●The erase width can be set from 0" to 1" in five steps using user program No. 16. See page 49.
●This feature cannot be used with the 2 in 1 or 4 in 1 feature.
Place the original on the original table and close the
1 document feeder cover.
●The SPF can also be used for this feature.
| Use the TRAY SELECT ( | ) key to select the paper tray | SPECIAL |
2 with the desired paper size. | FEATURES | ||
| ● The bypass tray and any tray with | ||
|
| ||
| used for this feature. |
|
|
|
|
|
|
|
|
| Erase |
3 | Press the ERASE key to select the desired erase mode. |
| |
● To select the EDGE + CENTER ERASE mode, press the ERASE key |
| ||
until both the EDGE and CENTER indicators light up.
4 Set the number of copies and press the START ( 
) key.
37
