Dixon ZTR RAM 50, 17411-1103 manual Specifications, Model ZTR RAM 44 ~ RAM

	SPECIFICATIONS
	Model ZTR RAM 44 ~ RAM 50
Chassis:	1-1/2 X 3 rectangle tube side frame
Mower Deck:	44” Deck: 11 GA fabricated construction/reinforced ribs
	50” Deck: 11 GA fabricated construction/reinforced ribs
Blade Drive:	Electric clutch.
Transmission:	Each rear wheel is independently driven by a Hydro
	Gear IZT hydrostatic drive.
Engine:
Ram 44:	18 HP Briggs & Stratton ELS, 4 cycle, single cylinder,
	overhead valve, air cooled, gasoline, vertical shaft, cast
	iron cylinder, full pressure lube w/spin-on filter.
Ram 50:	22 HP Briggs & Stratton ELS, twin cylinder, overhead
	valve, air cooled, gasoline, full pressure lube with oil
	filter, vertical shaft, aluminum head & block with cast-
	iron cylinder liners.
Starting	Electric-key switch operation w/safety interlock blade
System:	drive.
Tires:	Front 11 x 4.00-5 ribbed tread (16-21 PSI)
	Rear 18 x 8.50 x 8 4 ply turf tread (8-14 PSI)
Capacities:	Fuel	11 gallons approximately
	Engine Oil	Ram 44 - 1.5 quarts
		Ram 50 - 2 quarts
Dimensions:	Width	44” maximum track width
	Height	39” to top edge of seat
	Length	69” hitch tab to front bumper
	Weight	power unit: 474 lbs
		with 44” deck 600 lbs
		with 50” deck-620 lbs

Note: Additional information provided in service instructions under the

individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 14