DKS Enterprises 6500 OFF, OFF, OFF, OFF, OFF, OFF, OFF, Setting, DC Motor, Function, Not Used, Description, DIP-Switches, Do Not Adjust, Must be in the ON position

5.2 DC System Description

Do Not Adjust

Batteries

	– +	Red/White
	12 V Amp/Hr
3

12 V – 3 Amp/Hr +

DC ON/OFF

Power Switch

Black/White

Timer Not Used Do Not Adjust Charging LED

2340

DIP-Switches

Red/White OUTPUT NEGATIVE MOTOR DC OUTPUT POSITIVE MOTOR DC INPUT NEGATIVE BATTERY INPUT POSITIVE BATTERY COMMON VAC 24 INPUT VAC 24 OUTPUT ACTIVATION .used Not POWER RADIO INPUT OPEN .used Not COMMON

Gate will automatically OPEN and stay open during an AC power failure. DIP-Switch 3 setting will determine how operator will return to normal operation once AC power has been restored.

DC Motor

Black Red

To Primary or Single Operator		To Secondary Operator
	Orange to P2 Plug on Circuit Board	Orange to Second Terminal #5
Diode
	White to Main Terminal #13	White to Second Terminal #7
	Purple to Main Terminal #3	Purple to Second Terminal #8
	Green to Main Terminal #5	Green not used.

5.3 DIP-Switch Settings

Switch	Function	Setting	Description
1	Operation	OFF	Not Used
		ON	Gate will automatically open when a power outage occurs.
2	Changes	OFF	Set so that the gate cycles to the open direction upon loss of AC power.
	Open Direction
	Automatic	OFF	When AC power is restored, an input (push button, loop, radio receiver, etc.) is
			required to return the gate to normal operation.
3	Power-up
		ON	When AC power is restored, a 1-second pulse is sent to the gate operator input to
	Activation
			automatically restore normal operation.
4	Operator Type	ON	Must be in the ON position.
5	Not Used	OFF
6	Not Used	OFF
7	Not Used	OFF
8	Not Used	OFF

30 6500-065-K-7-08