Optional:
Installing 120VAC Outlets inside the Sleeper
If so equipped, the system will have 120VAC outlets that can be installed inside the sleeper for accessory use. The outlets may be installed anywhere inside the sleeper, however, they should be installed in an area that makes sense for the loads the driver will be applying (i.e., probably near one cabinet or the other).
The outlets should be installed with the
Optional:
Installing Shorepower Connection
The shorepower connection is only available with the inverter/charger.
The shorepower connection should be installed preferably on the driver’s side of the truck. If the driver’s side of the truck is not in reach of the battery box in which the inverter/charger is mounted, then the connection should be installed as close to the inverter/charger as possible (Fig. 8). This will probably be in the side of the battery box in which the inverter/ charger is mounted.
ENGLISH
Figure 8 – Shorepower connection installed
13