MOUNTING INSTRUCTIONS

RM2351-2354

We recommend to mount the panel on the door before the refrigerator is installed in the enclosure.

To mount the panel, follow these steps:

1. Slide the panel from the bottom of the door into the grooves on the vertical edges of the door .

2.Push the panel upwards.

3.Put the two plastic panel stops (from the parts bag) in the two holes at the lower door frame.

4.Put the decoration strip across the door and fasten it with three screws (from the parts bag).

RM2451-2454-2551-2554-2652-2662- 2663-2852- 2862 & NDR1062

Snap in

To mount the panel, follow these steps:

1.

Open the door 90 degrees.

 

2.

On new refrigerators,

1

the decoration strip are taped inside the door; if installed on the door, remove the door decora- tion strip (2) by gently pushing the four tabs away with a flat blade screwdriver (1).

3.

Insert the vertical edges

 

into the grooves of the

 

door frame (3).

4.

Push the panel down-

2

2

With screws

To mount the panel, follow these steps:

1. Open the door 90 de-

grees.

2.

On new refrigerators,

 

the decoration strip is

 

taped inside the door; if

 

installed on the door, re-

 

move the door decoration

 

strip (2) by removing its

 

three screws (1).

3.

Insert the vertical edges

1

1

1

 

 

 

 

2

 

wards so that the lower

horizontal edge of the

panel (4) is fitted into

the bottom grove (5).

5. Snap in the decoration

strip (2).

into the grooves of the

door frame (3).

4. Push the panel down-

wards so that the lower

horizontal edge of the

panel (4) is fitted into the

bottom grove (5).

1 1 1

3

3

5. Put the decoration strip

across the door so that

the gap is covered. Se-

cure the decoration strip

with the three screws

removed in step 2.

4

5

REFRIGERATOR REMOVAL

Before removing the refrigerator:

Verify that the AC and DC voltage leads are disconnected.

Shut off the gas supply.

Disconnect the gas supply line at the rear of the refrigerator. Always use a back up wrench when loosening and tighten- ing connections.

To remove the refrigerator, follow these steps:

1. Cap the gas supply line.

2.Loosen the screws anchoring the refrigerator to the enclosure.

3.Slide the refrigerator out of the compartment.

Replacement is the reverse of removal. When reinstalling the refrigerator, make sure the sealing strips are properly posi- tioned. Check all connections for gas leaks.

- 10 -

Page 9 Page 11
Page 10
Image 10
Dometic RM2451, RM2551, RM2351 installation manual Refrigerator Removal, Snap, With screws
Page 9 Page 11

RM2351, RM2451, RM2551 specifications

Dometic RM2551, RM2451, and RM2351 are popular absorption refrigerators renowned for their reliability and efficiency. Designed primarily for use in recreational vehicles (RVs), caravans, and boats, these units have become essential for outdoor enthusiasts and travelers who need a dependable cooling solution while on the move.

One of the main features shared across these models is their versatile absorption cooling technology. Utilizing a combination of ammonia, hydrogen, and water, the refrigerators operate silently and without the need for electrical compressors. This makes them especially appealing for use in environments where noise is a concern. Moreover, the absorption technology allows these refrigerators to function on multiple power sources, including 12V DC, 230V AC, and LPG gas. This versatility ensures that users can choose the most convenient power source available, making them ideal for off-grid adventures.

The Dometic RM2551 stands out with a capacity of 80 liters, providing ample storage for food and beverages. Its adjustable shelves and door compartments enhance organization, ensuring that users can make the most of the available space. The model also features a sleek design with a modern finish, making it an attractive addition to any RV or boat.

The RM2451 offers a slightly smaller capacity of 68 liters while maintaining similar features and functionalities. It is particularly favored for its energy efficiency, which translates to longer battery life in RVs. The model incorporates a reliable temperature control system that allows users to set their desired cooling level, ensuring optimal preservation of food and beverages.

On the other hand, the RM2351 is the most compact model with a capacity of 57 liters. This makes it a preferred choice for smaller vehicles or spaces where every inch counts. Despite its size, it does not compromise on performance, offering the same absorption cooling technology and flexibility in power sources as its larger counterparts.

All three models feature an intuitive control panel, allowing for easy operation, and they boast robust insulation that helps maintain temperature even in warm environments. The durable construction ensures longevity, making them worthy investments for those who love adventure.

In summary, the Dometic RM2551, RM2451, and RM2351 offer a range of sizes and capacities to cater to different needs while providing reliable cooling performance, energy efficiency, and versatility in power sources. Whether for long road trips, weekend getaways, or extended stays in nature, these absorption refrigerators are built to keep perishables fresh and drinks cool.
Top Page Image Contents