Dorel Eng. 4358-5936 manual Securing Your Child in the Child Restraint

Securing Your Child in the Child Restraint

4

Pull on harness adjustment strap to tighten harness snugly.

1

Position harness straps over the child’s shoulders.

NOTE: A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.

2	Push each buckle plate
	into buckle until you hear
	a “click”. Remember to
	always pull up on harness
	straps to make sure buckle
	is locked tightly.

5

Position the harness retainer at mid-chest (even with arm pits), away from the child’s neck.

3	Snap the harness retainer
	together.

!WARNING

Failure to fasten and tighten the harness system correctly with each use can result in serious injury or death.

14 15