Forward-Facing Installation with LATCH Belt: Install LATCH Belts

Fasten one LATCH belt hook to the anchor in the vehicle seat located in the vehicle seat bight.

Forward-

1

2

NOTE: Do not use LATCH system along with the adult lap or lap/ shoulder belt.

Route LATCH belt through upper slot in side of shell.

Pull one LATCH hook across the back and out the other side.

The LATCH adjuster can be on either side, but the belt should not be twisted.

Repeat for other side of child restraint. See your vehicle owner’s manual for locations and more information.

Place one knee in the child restraint and push down firmly while pulling up on the loop to tighten belt.

Facing Use: 22-40 lbs. (10.1-18 kg), 34-43” (85.1-110 cm), Over 1 year

3

Connect and tighten

harness straps prior to

 

 

installing in vehicle.

Place child restraint flush against the back of the vehicle seat forward- facing in the back seat.

5

6

With knee still in child restraint, attach hook to anchor in vehicle. Push down firmly and tighten top anchorage strap.

To adjust top anchorage strap: See “Adjusting Top Anchorage Strap” section.

of age.

24

25continued on next page.

Page 14
Image 14
Dorel Eng. 4358-5936 manual Age