Draytek 2800 Series

Vigor2800 Series User’s Guide

128

For additional security of wireless access, the Access Control facility allows you to restrict

the network access right by controlling the wireless LAN MAC address of client. Only the

valid MAC address that has been configured can access the wireless LAN interface. By

clicking the Access Control, a new web page will appear, as depicted below, so that you

could edit the clients' MAC addresses to control their access rights.

Enable Access Control Select to enable the MAC Address access control feature.

Policy Select to enable any one of the following policy. Choose

Activate MAC address filter to type in the MAC

addresses for other clients in the network manually.

Choose Isolate WLAN from LAN will separate all the

WLAN stations from LAN based on the MAC Address

list.

MAC Address Filter Display all MAC addresses that are edited before. Four

buttons (Add, Remove,

Client’s MAC Address - Manually enter the MAC

address of wireless client.

Attribute v - select to apply VPN to the connection of the wireless

client of the MAC address.

s - select to isolate the wireless connection of the wireless

client of the MAC address from LAN.

Add Add a new MAC address into the list.

Remove Delete the selected MAC address in the list.