Vigor2800 Series User’s Guide 19
Online status for Routed IP
Primary DNS Displays the assigned IP address of the primary DNS.
Secondary DNS Displays the assigned IP address of the secondary DNS.
IP Address (in LAN) Displays the IP address of the LAN interface.
TX Packets Displays the total transmitted packets at the LAN interface.
RX Packets Displays the total number of received packets at the LAN interface.
GW IP Addr: Displays the assigned IP address of the default gateway.
IP Address (in WAN) Displays the IP address of the WAN interface.
TX Rate Displays the speed of transmitted packets at the WAN interface.
RX Rate Displays the speed of received packets at the WAN interface.
Up Time Displays the total system uptime of the interface.
TX Blocks Displays the total number of transmitted ATM Blocks.
RX Blocks Displays the total number of received ATM Blocks.
Corrected Blocks Displays the total l number of received ATM Blocks corrupted but
corrected.
Uncorrected Blocks Displays the total number of received ATM Blocks corrupted but
uncorrected.
Mode Displays the modulation mode used: G.DMT, G.Lite, or T1.413.
State Displays the DSL line status.
Up Speed Displays the transmission speed of uploading data (bits/ second).
Down Speed Displays the transmission speed of downloading data (bits/
second).
SNR Margin Displays the value of Signal Noise Ratio Margin (dB). The higher
value has better signal quality.
Loop Att. Displays the value of subscribed Loop Attenuation.