Vigor2800 Series User’s Guide
46
Call Filter Check Enable to activate the Call Filter function. Assign a start
filter set for the Call Filter.
Data Filter Check Enable to activate the Data Filter function. Assign a start
filter set for the Data Filter.
Log Flag For troubleshooting needs you can specify the filter log here.
None - The log function is not activated.
Block - All blocked packets will be logged.
Pass - All passed packets will be logged.
No Match - The log function will record all packets that are not
matched.
Note that the filter log will be displayed on the Telnet terminal
when you type the log -f command.
Some on-line games (for example: Half Life) will use lots of fragmented UDP packets to
transfer game data. Instinctively as a secure firewall, Vigor router will reject these
fragmented packets to prevent attack unless you enable “Accept Incoming Fragmented UDP
Packets”. By checking this box, you can play these kinds of on-line games. If security
concern is in higher priority, you cannot enable “Accept Incoming Fragmented UDP
Packets”.
3
3.
.4
4.
.3
3
F
Fi
il
lt
te
er
r
S
Se
et
tu
up
p
Click Firewall and click Filter Setup to open the setup page.