Panasonic KX-HCM280A Automatic Setup Local or Internet Access or Manual Setup

Operating Instructions

Automatic Setup (Local or Internet Access) or Manual Setup

1.Click [Execute] on the Camera List window shown on page 133.

2.Click each button to execute the program.

Sets up the camera to view on the LAN.

Sets up the Internet access to the camera.

Manually sets up the camera. Disables IPsec. If disabled, the button is displayed gray. Displays the Setup page (see page 37).

Note

•For the first time installation or after pressing the FACTORY DEFAULT RESET button, you must select [Automatic Setup (Local Access Only)]. To start the Manual Setup, execute Automatic Setup (Local Access Only) first, and then start the Setup Program to execute the Manual Setup.

•See the Installation/Troubleshooting for the local and Internet access setup.

Manual Setup window

Set up each parameter seeing page 42—page 44.

•If more than 20 minutes have passed since the camera was turned on, the camera cannot be set up from the Setup Program. If the camera cannot be set up, restart the camera.

134