
Operating Instructions
1.2.3Using Operation Bar
(1) |
|
| Left End |
| |||
|
|
| Pan / Tilt |
(2) |
|
| Scan |
|
| ||
|
|
|
|
(3)
(4) Zoom
(1)End Display and Preset Display: When the pan/tilt has reached the end (Left End, Right End, Up End and Down End), End Display appears. When the zoom or focus operation has reached the end, Wide End, Tele End, Near End, or Far End appears. When clicking a preset button, the preset name appears.
(2)Pan Scan/Tilt Scan: Moves the lens throughout the
horizontal () or vertical (
) range, and returns to the original position.
(3) Pan/Tilt/Home Position: Controls lens direction. |
(5)
Focus
Pan ( : Left, : Right), Tilt ( : Up, : Down) and |
Preset Program
(6)
(7) Alarm
Brightness
(8) - STD + Output
Open
(9)
Short
Refresh Interval
(10)
Motion
Resolution
640X480
(11)∗ 320X240 Image Quality
Favor Clarity
(12) ∗ Standard Favor Motion
Home Position ( : Center [Default]) | |
(4) | Zoom Buttons: Zooms in or out on the camera image. |
(5) | Focus Buttons: Used to adjust the focus. |
(6) | Preset Button: Applies the camera direction to a preset |
position. You can preset 8 positions (see page | |
(7) | Alarm Position: When the External I/O detects a signal, |
the camera can be set up to turn to this position. Only an | |
administrator can operate it (see page 26). | |
(8) | Brightness: Changes brightness in 9 steps including |
[STD] (Standard). Clicking | |
brightness. | |
(9) | Output Control: Controls the output signals of the |
External I/O. | |
(10) Refresh Interval: Sets a refresh interval. | |
second interval) | |
(11) Resolution: Selects [640 x 480] or [320 x 240] (default) | |
pixels. | |
(12) Image Quality: Selects the image quality. |
•[Favor Clarity] optimizes the image for good clarity.
•[Standard] keeps the standard quality. (default)
•[Favor Motion] optimizes the image for motion display.
Note
When the camera image is not displayed correctly, click [Refresh] at the tool bar on the web browser. The image will be refreshed.
[For assistance, please call: | 21 |