Operating Instructions
Basic
(1)Network (IPv4) Configures the IPv4 network settings to connect the camera to the network (see page 40).
(2)Network (IPv6) Configures the IPv6 network settings to connect the camera to the network (see page 45).
(3) | IPsec | Enables IPsec (Transport or Tunnel mode) (see page 49). |
(4) | UPnP | Enables automatic port forwarding or shortcut to the |
|
| camera (see page 59). |
(5)Viewnetcam. Registers with the Viewnetcam.com service (see page 61). com
(6)Date and Time Sets the date and time, automatic time adjustment and adjust clock for daylight saving time settings (see page 63).
(7) | Camera | Sets camera name, white balance, AC power source |
|
| frequency, automatic focus range, mounting type, pan/tilt |
|
| range, return to specified position, color night view, and |
|
| vertical resolution settings (see page 65). |
|
| |
Account |
| |
(8) | Administrator*1 | Sets authentication setting and administrator security (user |
|
| name and password) (see page 71). |
(9) | General User*1 | Sets general user security (user name and password) and |
|
| general user's access level (see page 75). |
38
