|
| Operating Instructions |
|
|
|
| Setting | Description |
|
|
|
| Display | • Check the box to enable the camera. |
|
|
|
| IP Address*1 or | • Set the IP address or the host name to enable the camera. |
| Host Name*2 |
|
|
|
|
| Port No. | • Set the port number |
|
|
|
| Camera Name*3 | • This camera name is displayed only on the |
|
| page. |
|
|
|
*1
*2
*3
In IPv4, set 4 digits
In IPv6, set the host name.
Enter ASCII characters for the host name (see page 140). But [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<] and [>] are not available.
Enter
Enter ASCII characters (see page 140) or characters in each language
Note
•Set the local IP address and port number for the camera on the same LAN.
•If the cameras will be accessed from the Internet, be sure to use the global IP address. In this situation, local IP addresses such as 192.168. x.x cannot be used.
4.Click [Save] when finished.
•New settings are saved.
•The
[For assistance, please call: | 81 |