Operating Instructions
IPsec Mode Selection
Select transport mode or tunnel mode to access the camera.
Transport Mode (IPv4 Only)
The image is encrypted in the whole way between the camera and your PC. In the environment of Windows XP Service Pack 1 or later, transport mode is available only in IPv4.
Transport Mode
Encrypted
Prepare the following requirements.
Item |
| Supported Feature |
|
|
|
PC | Operating System | : Windows XP Service Pack 1 or later |
| Web Browser | : Internet Explorer 6.0 or later |
| ISP Service | : Services for multiple global addresses (A |
|
| global address must be set up on your |
|
| PC.) |
| Note |
|
| To use IPsec, you need to set up your operating system. | |
| See the Panasonic Network Camera support website at | |
| http://panasonic.co.jp/pcc/products/en/netwkcam/ for | |
| the setup. |
|
|
|
|
Camera | ISP Service | : Services for multiple global addresses (A |
|
| global address must be set up to the |
|
| camera.) |
|
|
|
50
