Operating Instructions
Setting | Description |
|
|
DNS Server | • DNS server address is required in the following conditions. |
Address | • Transferring camera images by |
| • Setting cameras by their host names on the Multi- |
| Camera Setup page |
| • Using the Viewnetcam.com service |
| • If you have the assigned DNS server IPv6 addresses by |
| your ISP or network administrator, enter them in this data |
| field. They usually have two addresses. |
| • IPv6 address consists of 8 hexadecimal digits divided with |
| ":". Consecutive 0s can be abbreviated as "::". |
| (E.g. 2001:2:3:4::5) |
|
|
Max. Bandwidth | • The bandwidth can be restricted. |
Usage | • Select the maximum bandwidth usage from [Unlimited] to |
| [0.1 Mbps]. |
| • This setting is valid in both IPv4/IPv6. |
| Note |
| Set the maximum bandwidth usage seeing the following |
| file sizes. These are examples for a JPEG file with a |
| standard image quality. File sizes may change depending |
| on the image quality or how bright the object is. |
| 160 x 120 pixels: About 3.5 KB (28 Kbit) |
| 320 x 240 pixels: About 10 KB (80 Kbit) |
| 640 x 480 pixels: About 18 KB (144 Kbit) |
|
|
Connection Type | • Select [Auto Negotiation] normally. If you cannot access |
| the camera, see page 44 "The Top page is not displayed." |
| in the Installation/Troubleshooting. |
| • This setting is valid in both IPv4/IPv6. |
48
