Operating Instructions
Setting | Description |
|
|
Enable Image | • Check the box to enable the buffer/transfer. Clear the box |
Buffer/Transfer | to disable it. |
|
|
Trigger | • Selecting [Timer] enables the camera to buffer/transfer the |
| image by timer. |
| • Selecting [Alarm] enables the camera to buffer/transfer the |
| image by alarm signal. |
|
|
Alarm enable | • Select [Rising: GND to Open (High).] or [Falling: Open |
condition | (High) to GND.]. [Rising: GND to Open (High).] is the state |
| that GND pin and pin 3 is left open. |
| [Falling: Open (High) to GND.] is the state that GND pin |
| and pin 3 is |
|
|
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer buffer/transfer (see page 63).
•Clicking [<Back] takes you back to the previous page.
•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.
Setting | Description |
|
|
A day of the | • Check the box to enable the day. Clear the box to disable it. |
week |
|
|
|
Active Time of | • Select the [Always] option when you do not specify the time |
Trigger | period. If you specify the time period, select the time period |
| option and set the time period. |
|
|
92
