
Operating Instructions
Main Features
IPv6*1 Network Camera
Your Panasonic Network Camera supports IPv6 (Internet Protocol Version 6), IPv6 was created to address the additional IP addresses that will be needed as the Internet continues to expand. Since the camera also supports IPv4 that's currently used, it is "dual stack" design will seamlessly operate while IPv6 is phased in. For more information in IPv6 you wish to visit http://www.ipv6.org/. See page 13 for more information.
Better Image Quality
The CCD sensor and the color night view mode provides better image quality and low light performance.
•The CCD sensor gives you clear image.
•You can monitor live video (Motion JPEG) that refreshes its image 30 frames per second.
•Color night view mode allows you to monitor the camera in low illuminance.
Remote Pan/Tilt/Zoom/Focus
The following features allow you to operate Network Camera from web browser on your PC. High speed Pan/Tilt operation can move the lens horizontally from
Click to Center | When you click a certain point on the camera image, the |
| point is centered on the image. |
Preset Position | You can register 8 preset positions. When you click each |
| button, the image switches to its position. |
Output Control | You can control the external devices (Open or Short to |
| GND) (E.g., turning the light on or ringing a buzzer). |
Video Output
Network Camera has an analog composite output terminal. You can view images from Network Camera on TV and record them on videotapes.
*1 To connect in IPv6, subscribe to the ISP's "IPv4/IPv6
2