Operating Instructions
5.Set the Lens Position When Triggered setting, and click [Next>].
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts after the camera turns to the alarm position.
•Clicking [<Back] takes you back to the previous page.
•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.
Setting | Description |
|
|
Lens Position | • Set [Move to alarm position] to move the lens to the alarm |
When Triggered | position (see page 26) when the alarm signal is detected. |
|
|
6.Set the image settings, and click [Next>].
•Clicking [<Back] takes you back to the previous page.
•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.
Setting | Description |
|
|
Image | • Select image resolution (640 x 480, 320 x 240 (default) or |
Resolution | 160 x 120 pixels) to buffer or transfer. |
|
|
Image Quality | • Select the image quality. |
| [Favor Clarity] optimizes for good quality. |
| [Standard] offers standard quality. |
| [Favor Motion] optimizes for enhanced motion. |
| [Mobile Phone] is for a transfer to a cell phone. |
Note
640 x 480 pixels cannot be set for a transfer to a cell phone.
[For assistance, please call: | 93 |
