Operating Instructions
2.21 Controlling External Output Terminal
The external I/O terminal can be used to connect an external output device, such as a light. The external output device can be controlled by pressing the Output Control buttons on the operation bar. You can change the initial status of the output signal on the External Output page.
1.Click [External Output] on the Setup page.
2.Click [Save] when finished.
•Clicking [Cancel] cancels your settings without saving changes.
•New settings are saved.
•When finished, "Success!" is displayed.
Setting |
| Description |
|
|
|
External Device | • | If you check [Open], the internal transistor turns off and the |
Control Output |
| external output terminal gets high impedance (open |
|
| collector) when the camera powers up. If you check [Short |
|
| to GND], the internal transistor turns on and is electrically |
|
| |
|
| The external output terminal gets low impedance (0 V). |
|
|
|
Button name | • | You can change the output control button names on the |
modification |
| operation bar. You can name the button depending on your |
|
| external devices. |
|
|
|
3.Click [Go to External Output Control page].
• The External Output Control page is displayed.
106
