Operating Instructions
2.17Buffering or Transferring Images by Alarm Signal
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E- mail or FTP.
An external sensor connected to the external I/O terminal can be used with the buffer/transfer by alarm feature. When the sensor is triggered, the camera can buffer or transfer images by alarm.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Alarm] for trigger, select [Rising: GND to Open (High).] or [Falling: Open (High) to GND.] and click [Next>].
Note
•Click [Delete Buffered Images] to delete this buffered images.
•Click [Save] to save the settings.
•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.
[For assistance, please call: | 91 |
