Panasonic KX-HCM280A operating instructions Name by E-mail or FTP transfer uses only 24 h format

Operating Instructions

Setting	Description
Time Setting	• Select date and format (AM/PM or 24 H). These settings
	are used for image buffer/transfer, operation time and time
	stamps on the buffered image. But E-mail subject and file
	name by E-mail or FTP transfer uses only 24 h format.
Automatic Time	• NTP (Network Time Protocol) server synchronizes the
Adjustment	camera's internal clock. It adjusts automatically every day.
	Check the box to enable it.
	• Set the NTP server IP address. In IPv4, set 4 digits (0—
	255) and 3 periods such as "192.168.0.253". But "0.0.0.0"
	and "255.255.255.255" are not available. In IPv6, set 8
	hexadecimal digits divided with ":". Consecutive 0s can be
	abbreviated as "::". Or set a host name (1—255
	characters).
	• Select your time zone.

	Note
	The camera will not synchronize to the NTP server if the
	time setting from the NTP server moves forward or
	backward more than 1 hour at a time. This is to protect the
	camera's time setting from fraudulent NTP server
	tampering, incorrect time information, etc.
Adjust Clock for	• During the daylight saving time, the internal clock is turned
Daylight Saving	forward an hour. The clock will shift one hour forward at the
Time	set time on the Start Day, and move back one hour at the
	set time on the End Day. Check the box to enable it.

Note

An "s" is put between date and time of time stamp when enabling this feature. The time stamp will be attached to the transferred images by the Image Transfer feature.

3.Click [Save] when finished.

•New settings are saved.

•When finished, "Success!" is displayed.

4.Click [Go to Date and Time page].

•The Date and Time page is displayed.

Note

Date and time settings become incorrect depending on the length of power-on time or the internal temperature. Using the Automatic Time Adjustment is recommended.

64