Operating Instructions
Setting up the IPv6 Router, your PC, and the Camera
Setting up the IPv6 Router
Set up the router as you subscribe to the IPv6 service. If the access from WAN side is disabled on the router, enable the TCP packets from WAN side in the packet filtering. See the Panasonic Network Camera support website at http:// panasonic.co.jp/pcc/products/en/netwkcam/ for information about the recommended routers.
Setting up your PC
1.Click [Start] 
[All Programs] 
[Accessories] 
[Command Prompt].
•Command Prompt window is displayed.
2.Enter "ipv6 install".
•"Succeeded" is displayed.
Note
If Windows XP Service Pack 1 or later is not installed, "Succeeded" will not be displayed. Install it on your PC.
3.Enter "ipconfig".
•If the IPv6 address is properly assigned to your PC, IPv6 address will be displayed on the window.
Setting up the Camera
Usually, IPv6 address is automatically assigned. If you assign a static IPv6 address, see page 45. To access the camera in IPv6, you need to subscribe to the domain name service such as Viewnetcam.com, and register the URL.
Confirming that You Can Access the Camera
Confirm that the image is properly displayed (see page 11).
14
