DM 2610013190 06-11:DM 2610013190 06-11.qxp 6/6/11 10:43 AM Page 11
DUST ExTRACTION (Optional accessory)
Your tool is equipped with a dust port for dust extraction. To use this feature, insert dust port adapter (optional accessory) into dust port, attach vacuum hose into the adapter, then connect the opposite end of the hose to a shop vacuum cleaner (Fig. 3).
FIG. 3
VACUUM HOSE (Not included)
DUST PORT ADAPTER | DUST |
(Optional accessory) | PORT |
Introduction
Thank you for purchasing the Dremel SM20.
This tool was designed to tackle a wide variety of projects in and around the home. The Dremel SM20 completes tasks quicker and more efficiently than a series of other tools that would be needed to complete a job or project. This tool is also compact, ergonomic, and cuts virtually all common materials.
After using your new Dremel SM20 you’ll find that it is the right size tool to get projects done at just a fraction of the size of a traditional circular saw. With a full line of accessories the tool cuts through virtually any common material in the home- wood, plastic, metal, drywall and tile. The tool also features two cutting wheel positions, one position using a standard flat
wheel for all your typical straight cuts and a second position for making flush cuts along flooring or against a wall.
In addition to versatility, the Dremel SM20 provides excellent line of sight for confident, precise cuts so you will get accurate cuts the first attempt and avoid wasting time or material.
Visit www.dremel.com to learn more about what you can do with your new Dremel tool.
INTENDED USE
This Dremel SM20 tool is intended for straight cuts in wood, plastic, metal, drywall, fiberboard, and tile using the applicable accessories recommended by Dremel.
Operating Instructions
! WARNING | Hold the tool with both hands |
| while starting the tool, since |
|
torque from the motor can cause the tool to twist.
Start the tool before applying to work and let the tool come to full speed before contacting the workpiece. Lift the tool from the work before releasing the switch. DO NOT turn the switch “ON” and “OFF” while the tool is under load; this will greatly decrease the switch life.
PADDLE SWITCH WITH "LOCK-OFF" FEATURE
The Paddle switch enables the operator to control the switch functions of
TO UNLOCK SWITCH AND TURN TOOL "ON": Push
TO SWITCH TOOL "OFF": Release pressure on paddle lever. The switch is spring loaded and will return to "OFF" position automatically (Fig. 4).
