Dremel SM20 manual Assembly, Flush Cutting Wheel ASSEMBLy

! WARNING

DM 2610013190 06-11:DM 2610013190 06-11.qxp 6/6/11 10:43 AM Page 10

Assembly

STANDARD FLAT WHEEL ASSEMBLy Disconnect the plug from the power source before

making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.

1. Turn LOCK BOLT with wrench provided clockwise and remove LOCK BOLT and OUTER WASHER (Fig. 2). If the shaft moves while attempting to loosen the lock bolt press the spindle lock (Fig. 2).

2. Slide wheel behind the guard face and mount it against the INNER WASHER on the shaft (Fig. 2a).

3.Reinstall OUTER WASHER and tighten lock bolt finger tight.

4.Press spindle lock to lock shaft and tighten LOCK BOLT counter-clockwise until tight with the wrench provided.

FLUSH CUTTING WHEEL ASSEMBLy

1.Repeat step 1 of above.

2.Place flush cutting wheel against the INNER WASHER on the spindle shaft. (Fig. 2b).

3.Reinstall OUTER WASHER and tighten LOCK BOLT finger tight.

4.Press spindle lock to lock shaft and tighten LOCK BOLT counter-clockwise until tight with the wrench provided.

SPINDLE LOCK

INNER

WASHER

STANDARD

FLAT WHEEL

FIG. 2a

FIG. 2

GUARD FACE

FLUSH CUTTING WHEEL

(OPTIONAL)

LOCK

BOLT

OUTER WASHER WRENCH

FIG. 2b

GUARD

FACE

STANDARD	FLUSH
WHEEL	CUTTING WHEEL

-10-