12

9. TECHNICAL DESCRIPTION

Specifications:

Item

 

Specification

Power Supply(Note: See

 

AC 100-120V 50/60 Hz, 5.0A

(for 120V system)

rating label on the product)

 

AC 220-240V 50/60 Hz, 3A(for 230V system)

Fuse Rating

 

T5A/250V(for 120V system)

 

 

 

T3A /250V(for 230V system)

 

 

 

 

 

 

 

Dimension(LxWxH)

 

15.8 x 38 x 26.8 (cm) or 6.2” x 15” x 10.5”

Weight

 

5.5 kg or 12.1 lb

 

 

 

 

 

Operation:10° C to 33° C (50° F to 91° F)

 

Temperature

 

Storage: -15° C to 50° C (5° F to 122° F)

Environment

 

 

Shipping: -15° C to 70° C (5° F to 158° F)

 

 

Operation: 10% to 90% non-condensing

 

 

 

 

Humidity

 

Storage: 10% to 90% non-condensing

 

 

 

Shipping:10 % to 90% non-condensing

 

 

 

Class I, Type BF, IPX0

 

 

Classification

 

Applied Part: Air Mattress

 

 

 

Not suitable for use in the presence of a flammable

 

 

 

 

 

 

anesthetic mixture (No AP or APG protection)

Mattress

 

Specification

 

 

 

8” Mattress with 10” side bolster

Model

 

2” foam pocket is provided

 

 

 

Standard (35.4” width)

 

48” width

Dimension

 

200 x 90 x 20.3 (25.4)

 

200 x 122 x 20.3 (25.4) cm or

(LxWxH)

 

cmor78.7" x 35.4" x 8" (10”)

 

78.7” x 48” x 8” (10”)

Weight

 

7.5 kg or 16.5 lb

 

9.5 kg or 20.9 lb

Maximum Weight Capacity

 

200kg or 440 lbs

 

450kg or 1,000lbs

NOTE:Mattress dimension and weight is measured without foam cushion

READ ALL INSTRUCTIONS BEFORE OPERATING THIS DEVICE.

DANGER - To reduce the risk of electrocution:

1.Always unplug this product immediately after using.

2.Do not use while bathing.

3.Do not place or store product where it can fall or be pulled into a tub or sink.

4.Do not place in or drop into water or other liquid.

5.Do not reach for a product that has fallen into water. Unplug immediately.

WARNING - To reduce the risk of burns, electrocution, fire, or injury to persons:

1.This product should never be left unattended when plugged in.

2.Close supervision is necessary when this product is used by, on, or near children or invalids.

3.Use this product only for its intended use as described in this manual. Do not useattachments not recommended by the manufacturer.

4.Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair.

5.Keep the cord away from heated surfaces.

6.Never block the air openings of this product or place it on a soft surface, such as a bed or couch, where their openings may be blocked. Keep the air opening free of lint, hair, and other similar particles.

7.Never drop or insert any object into any opening or hose.

8.Connect this product to a properly grounded outlet only. See Grounding Instructions.

NOTE, CAUTION AND WARNING STATEMENTS:

NOTE - Indicate some tips.

CAUTION - Indicate correct operating or maintenance procedures in order to prevent damage to or destruction of the equipment or other property.

WARNING - Calls attention to a potential danger that requires correct procedures or practices in order to prevent personal injury.

SYMBOLS

Authorised representative in the European community

Manufacturer

"BF"symbol, indicate this product is according to the degree of protecting against electric shock for type BF equipment

Grounding terminal (for 230V system)

Attention, should read the instructions!

Disposal of Electrical & Electronic Equipment (WEEE):

This product should be handed over to an applicable collection point for the recycling of electrical and electronic equipment. For more detailed information about the recycling of this product, please contact your local city office, household waste disposal service or the retail store where you purchased this product.

2

13

1. INTRODUCTION

Page 3
Image 3
Drive Medical Design 14000 Technical Description, Read ALL Instructions Before Operating this Device, Specification