OPERATING INSTRUCTIONS

LIGHTING INSTRUCTIONS :

1.Open the bottom louvers of the face plate to reach the control.

2.Turn the gas valve knob to the “OFF” position and wait 5 minutes.

Note : You have to depress the gas valve knob to turn from “PILOT” to “OFF” or from “OFF” to “PILOT”.

3.Turn the gas valve knob to “PILOT”.

4.Depress and hold the knob while lighting the pilot by pressing the pilot igniter button (RED button ). Keep the knob depressed for about 1 minute. Release the knob. The pilot should continue to burn by itself, if not, repeat step 4.

Note : You may need to press the pilot igniter button more than one time to light the pilot.

5.Turn the gas valve knob to the “ON” position.

6.Turn the face place mounted switch to the “ON” position. If you don’t have an additional wall switch , the main burner will come on. Otherwise, turn the wall switch to “ON” if you want the main burner to come on.

7.The other knob controls the gas flow and the power of the appliance.

SHUTDOWN INSTRUCTIONS

Main burner only : Turn off the face plate switch ( or wall switch ).

To relight the main burner, turn the switch on ( or the wall switch )

Pilot and Main burners : Turn the gas valve to the “OFF” position. Depress the knob to pass from the “PILOT” to “OFF” position.

FAN OPERATION :

To turn the air blower “ON” or “OFF”, activate the face plate switch connected to the yellow wires. The fan will not start if the appliance is cold. Operate the gas insert for at least 15 minutes to heat up the thermo-switch. The fan will also turn itself off about 20 minutes after extinction of the main flame.

Note: The speed control must also be on to allow fan to work.

17

Page 18
Image 18
Drolet 7000 MVRLC, 36C03U TYPE 139 manual Operating Instructions Lighting Instructions, Shutdown Instructions, Fan Operation